804908
7
Zoom out
Zoom in
Previous page
1/25
Next page
Español ITalIaNo NEDERlaNDs FRaNÇaIs DEUTsCH ENGLISH
6
Inserting and Removing the HMI
(see figure A)
To insert the HMI 3, slide it from the front into the holder 4.
To remove the HMI 3, press the lock latch 15 and slide the HMI
toward the front out of the holder 4.
■ Remove the HMI when you park the eBike.
It is possible to secure the HMI against removal in the holder. To do
so, remove the holder 4 from the handlebars. Put the HMI in the
holder. Screw the locking screw 16 (thread M3, 8mm long) from
below into the thread provided in the holder. Mount the holder back
onto the handlebars.
ECO
KM/H
Reichweite
KM /H
RESET
EC O
KM /H
Reichweite
KM
/H
4
3
15
16
A
Checking the Speed Sensor
(seefigureB)
The speed sensor 17 and its spoke magnet 18 must be mounted in
such a manner that the spoke magnet, after a turn of the wheel,
moves past the speed sensor with a clearance of at least 5mm, yet
no more than 17mm.
Note: If the clearance between speed sensor 17 and spoke magnet
18 is too small or too large, or if the speed sensor 17 is not properly
connected, the speed indication f will fail, and the eBike drive will
operate in emergency mode.
In this case, loosen the screw of the spoke magnet 18 and fas-ten
the spoke magnet to the spoke in such a manner that it runs past
the mark of the speed sensor at the correct clearance. When the
speed is still not being indicated in the speed indication f after this,
please refer to an authorised bicycle dealer.
B
17
18
517 mm
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale E-series 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale E-series 2014 in the language / languages: English as an attachment in your email.

The manual is 8.17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale E-series 2014

Cannondale E-series 2014 Additional guide - German - 25 pages

Cannondale E-series 2014 Additional guide - Dutch - 25 pages

Cannondale E-series 2014 Additional guide - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info