804922
8
Zoom out
Zoom in
Previous page
1/12
Next page
7
Cleaning
When cleaning your bike, use a damp sponge or a soft brush with only a mild soap and water solution. Rinse the sponge often. Do not spray
water.
NOTICE
Do not use a pressure washer or dry with compressed air. This will force contaminants into sealed areas, electrical connections/
components promoting corrosion, immediately damaging, or result in accelerated wear.
WARNING
KEEP WATER AWAY FROM THE ELECTRICAL COMPONENTS.
MAKE SURE THE BIKE IS SECURED UPRIGHT AND CAN NOT FALL OVER ACCIDENTALLY WHILE YOU ARE CLEANING IT. Don’t rely on the
kickstand. Use a sturdy portable bicycle wheel stand to hold the bike upright.
Tightening Torques
Correct tightening torque for the fasteners (bolts, screws, nuts) on your bicycle is very important to your safety.the durability and performance of
your bicycle. We urge you to have your Dealer correctly torque all fasteners using a torque wrench.
DESCRIPTION Nm In Lbs Loctite™
KICKSTAND MOUNTING 7.0 62.0
242 (blue)
REAR RACK MOUNTING BOLTS 3 - 4 26.5 - 35.4
STEM/HANDLEBAR CLAMP BOLTS 6.0 53.0
DROPOUT MOUNTING BOLTS 15 133
LEFTY CLAMP BOLTS 7-9 62-80
LEFTY WHEEL AXLE BOLT 15 133
If you decide to tighten fasteners yourself always use a good torque wrench!
Drive Unit
NOTICE
Drive unit is maintenance-free and must only be serviced at an authorized service center. This will ensure the quality and safety of
the driving unit. Never attempt to open, remove it from the frame, or work on it yourself. Other components of the eBike drive (e.g.
drive chain, front chain ring, rear cassette, rear derailleur, crankarm) must be serviced by your Cannondale Dealer. Replacement parts
must be identical to the original Cannondale specification for the bike. See Specifications. Failure to replace components with original
specification can result in serious overload or other damage to the drive unit. Unauthorized opening or service of the drive unit will void
the warranty. The drive system will not function without the computer unit attached to the base properly. If the computer disconnects
from the base during operation, the drive system will shut off. If this happens you will have to stop the bike, turn the system off , re-
attach the computer to the base, and then turn the system back on to resume. Remove the computer when not operating the bike to
prevent theft or unauthorized use.
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Contro-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Contro-E in the language / languages: English as an attachment in your email.

The manual is 2.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Contro-E

Cannondale Contro-E User Manual - German - 12 pages

Cannondale Contro-E User Manual - Dutch - 12 pages

Cannondale Contro-E User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info