804914
193
Zoom out
Zoom in
Previous page
1/220
Next page
193
PART 3
(E) Lefty Type
8. Install Front Wheel
Cannondale Bicycle Owner’s Manual
Smear a small amount of grease on the
bearing surfaces of the Lefty spindle. Place
the open side of the Lefty wheel hub over the
spindle and push towards the fork leg.
Wiggle and push until the wheel stops. Use a
5mm allen wrench to tighten the Lefty
attachment bolt. You will see the wheel move
towards the fork leg as you tighten this bolt.
Next use a torque wrench to torque this
attachment to the specification marked on
the part.
Use the StopLock to reinstall the front brake
caliper to the fork:
With the StopLock release lever turned
down, slide the brake mount/caliper into the
Lefty. As you do this, make sure the brake
rotor locates between the brake pads.
With the brake mount firmly seated to the
Lefty, turn the StopLock release lever up to
lock the brake adapter/caliper onto the lower
leg.
WARNING
Because properly installing the front wheel is critical to your safety, please also read the wheel
installation instructions contained in the Owner’s Manuals that came with your bike. See video
instructions at www.cannondale.com under SUPPORT, Help Center and then Owners Manuals
and Assembly.
Exact URL: https://cannondale.zendesk.com/hc/en-us/
articles/360060427853-Start-Here-Find-Your-Bike-
sAssembly-Video
Figure. Locked Brake Mount
193


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Canvas Neo 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Canvas Neo 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Canvas Neo 2020

Cannondale Canvas Neo 2020 Additional guide - English - 24 pages

Cannondale Canvas Neo 2020 User Manual - German - 102 pages

Cannondale Canvas Neo 2020 Additional guide - German - 24 pages

Cannondale Canvas Neo 2020 User Manual - Dutch - 102 pages

Cannondale Canvas Neo 2020 Additional guide - Dutch - 24 pages

Cannondale Canvas Neo 2020 User Manual - French - 102 pages

Cannondale Canvas Neo 2020 Additional guide - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info