804914
114
Zoom out
Zoom in
Previous page
1/220
Next page
114
PART 2
Carbon Fiber Forks & Stems
138690 Rev2 (10/22)
Section A. Important Safety Information
Cannondale Bicycle Owner’s Manual
STEERER TUBE
HEADTUBE
STEM
2 - 3 mm
HEADSET TOP CAP
HEADSET SPACERS
48 mm
Do not grease.
MAXIMUM STACK HEIGHT
Measure from the top edge of the
headtube to the bottom edge
of the stem.
55mm
EXPANDER BOLT
TOP CAP
EXPANDER
EXPLODED VIEW
Top cap at
upper stem bolt
Expander at
lower stem bolt
INSTALLED CORRECTLY KP017/
6Nm, 53InLbs
REV. 1
4Nm, 35InLbs
REV. 2
SI Compression Assembly Instructions
The following procedure should only be completed by a professional bike mechanic.
1. Assemble the fork, headset, spacers, and stem without tightening the stem bolts onto the head
tube. When the system is assembled, the carbon steerer tube should be 23 mm below the top
stem. All spacers must be located below the stem and within the maximum stack height as
shown. No spacers may be used above the stem.
2. Set-up the compression assembly before inserting it. Adjust the length so that the expander is
located at lower stem bolt. The top cap and the expander end provides critical support to the
carbon steerer when tightening the stem bolts. Adjust the length by threading the top cap on
the expander parts.
3. When the assembly is the correct length, insert it into the steerer tube. It is designed to fit
snugly inside the steerer. Insert an Allen key through the access hole in the TOP CAP and into
the EXPANDER BOLT. Tighten the to the specified torque.
4. Now, to set bearing preload, insert a 6mm allen key into the hex shape in the TOP CAP itself.
Turn the entire top cap clockwise to increase preload. Turning it counter-clockwise will decrease
the preload. When the headset preload feels correct, turn the stem to align the handlebar and
tighten the stem fork clamp bolts to the torque specified for the stem. Consult the stem
manufacturer’s instructions. The torque values for components are often marked on the part.
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Canvas Neo 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Canvas Neo 2020 in the language / languages: English as an attachment in your email.

The manual is 12.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Canvas Neo 2020

Cannondale Canvas Neo 2020 Additional guide - English - 24 pages

Cannondale Canvas Neo 2020 User Manual - German - 102 pages

Cannondale Canvas Neo 2020 Additional guide - German - 24 pages

Cannondale Canvas Neo 2020 User Manual - Dutch - 102 pages

Cannondale Canvas Neo 2020 Additional guide - Dutch - 24 pages

Cannondale Canvas Neo 2020 User Manual - French - 102 pages

Cannondale Canvas Neo 2020 Additional guide - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info