779941
99
Zoom out
Zoom in
Previous page
1/106
Next page
96 97
PART II
STEERER TUBE
HEADTUBE
STEM
2 - 3 mm
HEADSET TOP CAP
HEADSET SPACERS
48 mm
Do not grease.
MAXIMUM STACK HEIGHT
Measure from the top edge of the
headtube to the bottom edge
of the stem.
55mm
EXPANDER BOLT
TOP CAP
EXPANDER
EXPLODED VIEW
Top cap at
upper stem bolt
Expander at
lower stem bolt
INSTALLED CORRECTLY KP017/
6Nm, 53InLbs
REV. 1
4Nm, 35InLbs
REV. 2
SI Compression Assembly KP017/ Instructions
The following procedure should only be completed by a professional bike mechanic.
1. Assemble the fork, headset, spacers, and stem without tightening the stem bolts onto the head tube.
When the system is assembled, the carbon steerer tube should be 2-3 mm below the top stem. All spacers
must be located below the stem and within the maximum stack height as shown. No spacers may be
used above the stem.
2. Set-up the compression assembly before inserting it. Adjust the length so that the expander is located at
lower stem bolt. The top cap and the expander end provides critical support to the carbon steerer when
tightening the stem bolts. Adjust the length by threading the top cap on the expander parts.
3. When the assembly is the correct length, insert it into the steerer tube. It is designed to fit snugly inside
the steerer. Insert an Allen key through the access hole in the TOP CAP and into the EXPANDER BOLT.
Tighten the to the specified torque.
4. Now, to set bearing preload, insert a 6mm allen key into the hex shape in the TOP CAP itself. Turn the
entire top cap clockwise to increase preload. Turning it counter-clockwise will decrease the preload. When
the headset preload feels correct, turn the stem to align the handlebar and tighten the stem fork clamp
bolts to the torque specified for the stem. Consult the stem manufacturer’s instructions. The torque
values for components are often marked on the part.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cannondale Bikes 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cannondale Bikes 2018 in the language / languages: English as an attachment in your email.

The manual is 5.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cannondale Bikes 2018

Cannondale Bikes 2018 User Manual - German - 102 pages

Cannondale Bikes 2018 User Manual - Dutch - 102 pages

Cannondale Bikes 2018 User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info