Manual Candy GV 159TWC3 (page 92 of 104) (English, Danish, Swedish, Norwegian, Finnish)

620982

Zoom out

Zoom in

1/104

! Re-set the programme selector to the

OFF position.

! By pressing this button, it is possible to

reduce the maximum speed, and if you

wish, the spin cycle can be cancelled.

! To reactivate the spin cycle press the button

until you reach the spin speed you would

like to set.

! It is possible to modify the spin speed

without pausing the machine.

! This button allows you to change the

temperature of the wash cycles.

! It is not possible to raise the temperature

over the maximum allowed for every

programme, in order to save the fabrics.

! This button allows you to pre-programme

the wash cycle to delay the start of the

cycle for up to 24 hours.

! To delay the start use the following

procedure:

- Set the required programme.

- Press the button once to activate it (h00

appears on the display) and then press

it again to set a 1 hour delay (h01

appears on the display). The pre-set

delay increases by 1 hour each time the

button is pressed, until h24 appears on

the display, at which point pressing the

button again will reset the delay start to

zero.

- Confirm by pressing the START/PAUSE

button (the light on the display starts to

flash). The countdown will begin and

when it has finished the programme will

start automatically.

! It is possible to cancel the delay start by

turning the programme selector to OFF.

If there is any break in the power supply

while the machine is operating, a special

memory stores the selected programme

and, when the power is restored, it

continues where it left OFF

! By selecting this button there is a choice

of 3 levels of wash intensity, depending

on how much the fabrics are soiled (can

be used only on some programmes as

shown in the table of programmes).

The option buttons should be selected

before pressing the START/PAUSE

button.

If an option is selected that is

not compatible with the selected

programme then the option indicator

first flashes and then goes off.

SPIN SELECTION button

To prevent damage to the fabrics, it is

not possible to increase the speed

over that which is automatically

suitable during the selection of the

program.

The machine is fitted with a special

electronic device, which prevents the

spin cycle should the load be

unbalanced.

This reduces the noise and vibration in

the machine and so prolongs the life of

your machine.

TEMPERATURE SELECTION button

DELAY START button

STAIN LEVEL button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Candy GV 159TWC3 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 6,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Candy GV 159TWC3 Manual

Product: