663518
35
Zoom out
Zoom in
Previous page
1/76
Next page
EN
BUTTONS INDICATOR LIGHT
These light up when the
relevant buttons are
pressed.
If an option is selected that
is not compatible with the
selected programme then
the light on the button first
flashes and then goes off.
PROGRAMME SELECTOR WITH
OFF POSITION
RO
TATES IN BOTH
DIRECTIONS.
WHEN THE
PROGRAMME
SELECTOR IS TURNED A
SPIN INDICATOR LIGHTS
WILL GO ON.
N.B. TO SWITCH OFF THE
MACHINE, TURN THE
PROGRAMME
SELECTOR TO THE OFF
POSITION.
Press the "Start/Pause"
button to start the selected
cycle.
The programme carries out
with the programme
selector stationary on the
selected programme till
cycle ends.
Switch off the washing
machine by turning the
selector to OFF.
NO
TE:
THE PROGRAMME
SELECTOR MUST BE
RETURN TO THE OFF
POSITION AT THE END
OF EACH CYCLE OR
WHEN STARTING A
SUBSEQUENT WASH
CYCLE PRIOR TO THE
NEXT PROGRAMME
BEING SELECTED AND
STARTED.
35
DE
TASTENANZEIGE
Sie leuchten auf, sobald die
entsprechenden Tasten
gedrückt werden.
Falls eine Option gewählt
wird, die mit dem
eingestellten Programm nicht
kompatibel ist, blinkt die
Anzeige auf der Taste zuerst,
dann erlischt sie.
PROGRAMMWAHLSCHALTER MIT
OFF
KANN IN BEIDE
RICHTUNGEN GEDREHT.
WENN EIN PROGRAMM
EINGESTELLT WIRD,
LEUCHTET NACH
EINIGEN SEKUNDEN EINE
DER ANZEIGEN DER
SCHLEUDERDREHZAHL
AUF. UM DIE
LEUCHTANZEIGE ZU
LÖSCHEN, DREHEN SIE
DEN
PROGRAMMWAHLSCHA
LTER AUF OFF
Drücken Sie die START-Taste,
um das Programm zu starten.
Während des Waschgangs
bleibt der
Programmwahlschalter bis
zum Ende des Programmes
auf dem gewählten
Programm stehen.
Am Ende des
Waschprogrammes schalten
Sie das Gerät ab durch
Drehen des Wahlschalters auf
die Position OFF
HINWEIS:
DREHEN SIE IMMER
NACH BEENDIGUNG DES
PROGRAMMS, UND
BEVOR SIE EIN NEUES
PROGRAMM EINSTELLEN,
DEN
PROGRAMMWAHLSCHA
LTER AUF DIE POSITION
AUS.
INDICADORES LUMINOSOS
TECLAS
Se encienden cuando son
pulsadas las teclas
respectivas.
En caso de que se haya
seleccionado una opción
no compatible con el
programa elegido, la luz del
botón primero parpadeará
y después se apagará.
MANDO SELECTOR DE
PROGRAMAS CON
POSICIÓN DE “OFF”
EL MANDO PUEDE
GIRAR EN AMBOS
SENTIDOS.
CUANDO SE
SELECCIONA UN
PROGRAMA, DESPUÉS
DE ALGUNOS
SEGUNDOS, SE
ENCIENDE UN
INDICADOR
CORRESPONDIENTE AL
CENTRIFUGADO.
PARA APAGAR LA
SEÑAL LUMINOSA GIRE
EL PROGRAMADOR A
LA POSICICIÓN OFF.
Accionar la tecla
START/PAUSA" para iniciar la
fase de lavado.
El ciclo de lavado se
completará con el mando
selector de programas
colocado sobre el programa
seleccionado hasta el final
del ciclo de lavado.
Al final del ciclo de lavado,
apague la lavadora
llevando el mando selector
de programas a la posición
“OFF”.
NOTA:
SE DEBE LLEVAR SIEMPRE
EL MANDO SELECTOR
DE PROGRAMAS A LA
POSICIÓN "OFF" AL
FINAL DEL CICLO DE
LAVADO Y ANTES DE
SELECCIONAR UNO
NUEVO.
ES
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy GS4 1071D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy GS4 1071D3 in the language / languages: English, German, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info