459854
18
Zoom out
Zoom in
Previous page
1/41
Next page
34
35
TASTE “STARTZEITVORWAHL”
Diese Taste ermöglicht die
Programmierung einer
Startzeitvorwahl von bis zu 24
Stunden. Um die
Startverzögerung einzustellen,
gehen Sie wie folgt vor:
Wählen Sie das gewünschte
Programm.
Drücken Sie die Taste einmal,
damit die Funktion aktiviert ist.
Das Display zeigt h00. Drücken
Sie die Taste erneut, um eine
Startverzögerung von einer
Stunde einzustellen (das
Display zeigt nun h01). Bei
jedem weiteren Drücken der
Taste wird die
Startverzögerung bis h24um je
eine Stunde erhöht. Durch ein
weiteres Drücken wird die
Verzögerungszeit annulliert.
Bestätigen Sie Ihre Einstellung
mit der Taste “START/PAUSE”.
Die Leuchtanzeige im Display
fängt an zu blinken und die
Zeit beginnt abzulaufen. Ist die
Zeit abgelaufen, startet das
Programm automatisch.
Sie können die
Startzeitvorwahl wie folgt
löschen:
Halten Sie die Taste 5
Sekunden lang gedrückt, bis
das Display die
Voreinstellungen des
gewählten Programms wieder
anzeigt.
Nun können Sie entweder das
Programm durch Drücken der
Taste “START/PAUSE” manuell
starten oder das Programm
durch Drehen des
Programmwahlschalters auf
OFF löschen und ein neues
Programm einstellen.
TLAâÍTKO „ODLOÎEN¯ START“
Toto tlaãítko umoÏÀuje odloÏit
spu‰tûní pracího programu
maximálnû o 24 hodin.
Pokud si pfiejete odloÏit
spu‰tûní programu,
postupujte následujícím
zpÛsobem:
Zvolte poÏadovan˘ program.
Stisknûte tlaãítko jednou,
abyste jej aktivovali (na
displeji se objeví h00).
Opûtovn˘m stisknutím
nastavte odloÏení o 1 hodinu
(na displeji se objeví h01).
KaÏd˘m dal‰ím stisknutím se
odloÏení prodlouÏí o 1 hodinu
aÏ po h24. V pfiípadû dal‰ího
stisknutí se odloÏen˘ start
zru‰í.
Stisknutím tlaãítka
„START/PAUSA“ (kontrolka na
displeji zaãne blikat)
potvrdíte spu‰tûní poãítání
nastaveného ãasu. Po jeho
uplynutí se program
automaticky spustí.
OdloÏen˘ start je moÏné zru‰it
následovnû:
Stisknûte tlaãítko na 5
sekund, dokud se na displeji
nezobrazí parametry
zvoleného programu.
Stisknutím tlaãítka
„START/PAUSA“ mÛÏete teì
spustit pfiedtím zvolen˘
program. Pokud chcete cel˘
proces zru‰it, nastavte
ovladaã programÛ do
polohy OFF a následnû zvolte
jin˘ program.
TOUCHE “DEPART DIFFERE”
Cette option permet de
programmer le départ du
cycle de lavage jusqu’à 24
heures.
Afin d’utiliser cette fonction,
suivez la procédure ci-
dessous :
Choisissez le programme
Pressez le bouton départ
différé pour l’activer (h00
apparais sur l’écran) puis
pressez le à nouveau pour
choisir un départ différé
d’1 heure (h01 apparaît sur
l’écran) ; à chaque pression
le départ différé augmentera
d’1 heure jusqu’à ce que 24h
apparaisse sur l’écran, une
pression supplémentaire
réinitialisera le départ différé.
Confirmez en appuyant sur
"START/PAUSE" (la lumière sur
l’écran clignotera). Le
compte à rebours
commencera et à son terme
le programme débutera
automatiquement.
Il est possible d’annuler le
départ différé selon la
procédure suivante :
Maintenez le bouton appuyé
durant 5 secondes jusqu’à ce
que l’écran montre les
réglages du programme
choisi.
A cette étape il est possible
soit de lancer le programme
en appuyant sur
"START/PAUSE" soit d’annuler
le départ différé en
positionnant le
programmateur sur OFF puis
en sélectionnant un autre
programme.
TASTO “PARTENZA DIFFERITA”
Questo tasto permette di
programmare l’ avvio del
ciclo di lavaggio con un
ritardo massimo di 24h.
Per impostare la partenza
ritardata procedere nel
seguente modo:
Impostare il programma
desiderato.
Premere il pulsante una prima
volta per attivarlo (sul display
viene visualizzato h00) e
premere nuovamente per
impostare un ritardo di 1 ora
(sul display viene visualizzato
h01), ad ogni pressione
successiva il ritardo impostato
aumenta di 1 ora fino a h24
mentre con un ulteriore
pressione si azzera la partenza
ritardata.
Confermare premendo il tasto
START/PAUSA (La spia nel
display inizia a lampeggiare)
per iniziare il conteggio alla
fine del quale il programma
inizierà automaticamente.
E’ possibile annullare la
partenza ritardata agendo
come segue:
Tenere premuto il tasto per 5
secondi fino a quando sul
display non vengono
visualizzati i parametri del
programma scelto.
A questo punto è possibile
iniziare il programma scelto in
precedenza premendo il
tasto “START/PAUSA”o
annullare l’operazione
portando il selettore in
posizione di OFF e
successivamente selezionare
un’ altro programma.
“DELAY START” BUTTON
This button allows you to pre-
programme the wash cycle
to delay the start of the cycle
for up to 24 hours.
To delay the start use the
following procedure:
Set the required programme.
Press the button once to
activate it (h00 appears on
the display) and then press it
again to set a 1 hour delay
(h01 appears on the display);
the pre-set delay increases
by 1 hour each time the
button is pressed, until h24
appears on the display, at
which point pressing the
button again will reset the
delay start to zero.
Confirm by pressing the
START/PAUSE” button (the
light on the display starts to
flash). The countdown will
begin and when it has
finished the programme will
start automatically.
It is possible to cancel the
delay start by taking the
following action:
Press and hold the button for
5 seconds until the display will
show the settings for the
programme selected.
At this stage it is possible to
start the programme
previously selected by
pressing the “START/PAUSE
button or to cancel the
process by setting the
selector to the OFF position
and then selecting another
programme.
EN
FR
IT
DE
CZ
I
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy Grando Evo 1472 D-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy Grando Evo 1472 D-S in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Candy Grando Evo 1472 D-S

Candy Grando Evo 1472 D-S User Manual - Dutch - 21 pages

Candy Grando Evo 1472 D-S User Manual - Portuguese, Spanish - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info