513727
22
Zoom out
Zoom in
Previous page
1/49
Next page
4342
Q
DE
START/PAUSE TASTE
Nachdem Sie das gewünschte
Waschprogramm eingestellt
haben, warten Sie, bis die STOP-
Anzeige anfängt zu blinken,
bevor Sie die START-Taste
drücken.
Drücken Sie diese Taste, um das
Programm zu starten, die mit dem
Programmwahlschalter gewählt
wurde (je nach eingestelltem
Programm wird eine der
Leuchtanzeigen aufleuchten).
ANMERKUNG: NACH DER
BETÄTIGUNG DER START-
TASTE DAUERT ES EINIGE
SEKUNDEN, BIS DAS GERÄT
ANFÄNGT ZU ARBEITEN.
EINSTELLUNGEN NACH DEM
PROGRAMMSTART ÄNDERN
(PAUSE)
Nachdem das Programm
gestartet wurde, können nur die
Programmoptionen und die
Zusatzfunktionen mit den
Funktionstasten verändert
werden.
Drücken Sie und halten Sie die
Taste START für ca. 2 Sekunden
gedrückt.
Das Blinken der Anzeigen der
Optionstasten, der
Schleuderdrehzahlanzeige und
einer der Restzeitanzeigen zeigt
an, dass das Gerät sich in einer
Betriebspause befindet. Sie
können die Einstellungen nach
Wunsch verändern und das
Gerät durch Drücken der START-
Taste wieder in Betrieb setzen.
Die Anzeigen hören auf zu
blinken.
Wenn Sie während des
Programmablaufs Wäsche
entnehmen bzw. hinzufügen
wollen,warten Sie ZWEI Minuten,
damit der
Türverriegelungsmechanismus
die Tür entriegelt.
Nachdem Sie die Wäsche
entnommen bzw. hinzugefügt
haben, schließen Sie die Tür und
drücken Sie die START-Taste.Das
Gerät fängt wieder dort an zu
arbeiten,wo es aufgehört hatte.
EINGESTELLTES PROGRAMM
LÖSCHEN
Um das Programm zu löschen,
drehen Sie den
Programmwahlschalter auf OFF.
Wählen Sie nun ein anderes
Programm.
Drehen sie dann den
Programmwahlschalter wieder
auf OFF.
START/PAUSE BUTTON
When a programme is
selecting, wait for the “STOP”
indicator light to flash before
pressing the START button.
Press to start the selected
cycle (according to the
selected cycle one indicator
lights will go on) .
NOTE: WHEN THE START
BUTTON HAS BEEN
PRESSED, THE APPLIANCE
CAN TAKE FEW SECONDS
BEFORE STARTS
WORKING.
CHANGING THE SETTINGS
AFTER THE PROGRAMMES HAS
STARTED (PAUSE)
Once the programme has
started the settings can only
altered by pressing the
relevant buttons.
The programme may be
paused at any time during
the wash cycle by holding
down the "Start/Pause"
button for about two
seconds. When the machine
is in the paused mode, the
indicator light "Time To End",
spin speed and option
buttons will flash.
To restart the programme,
press the "Start/Pause" button
once again.
If you wish to add or remove
items during washing, wait 2
minutes until the safety
device unlocks the door.
When you have carried out
the manoeuvre,close the
door,press START button and
the appliance will continue
working where it left off.
CANCELLING THE
PROGRAMME
To cancel the programme,
set the selector to the OFF
position.
Select a different
programme.
Re-set the programme
selector to the OFF position.
EN
K  (START)
  
, 
   
 "STOP"  
,  
   .
     
   
(    
,    
).
: 
  
 (START), 
  
 
  
.
  
   
 (PAUSE)
   
   
    
,   
   2
  
/   
("Start/Pause").  
  
    
   
  
 
,   
   
 .
     
,   
 (START) .
    
    
  , 
 2   
  .
 ,  
    
 (START).  
    
   .
K 

   
,  
   OFF.
  
. 
  
  OFF.
EL
TECLA START/PAUSA
Después de haber
seleccionado un programa,
espere que la luz “STOP”
inicie su intermitencia antes
de accionar la tecla INICIO
(START).
Apretar para iniciar el ciclo
seleccionado con el mando
de programas (según el ciclo
introducido se iluminarán una
de los indicadores)
NOTA: DESPUÉS DE
HABER APRETADO LA
TECLA START, SE
NECESITAN UNOS
SEGUNDOS PARA QUE
LA LAVADORA INICIE EL
PROGRAMA.
MODIFICAR LA
PROGRAMACIÓN DESPUÉS DEL
INICIO DEL PROGRAMA (PAUSA)
Después del inicio del
programa pueden ser
modificados sólo las opciones y
parámetros mediante las teclas
función.Mantener pulsado la
tecla “START/PAUSA cerca de 2
segundos, la intermitencia de
los indicadores de las teclas
función ,del indicador del
tiempo restante y de la de
centrifugado,indican que la
lavadora está en pausa,
modificar lo que se desee y
poseteriormente accionar
nuevamente la tecla
START/PAUSAanulando así la
intermitencia.
Si se desea añadir o extraer
colada durante el lavado,
desactivar la tecla START,y
esperar DOS minutos hasta que
el dispositivo de seguridad
libere el bloqueo de la escotilla
Efectuada la operación,
después de haber cerrado la
escotilla y apretado la tecla
START, la lavadora volverá a
iniciar el lavado desde el punto
en que fué parada.
CANCELAR PROGRAMA
SELECCIONADO
Para cancelar el programa,
coloque el selector en
posición OFF.
Seleccionar un programa
distinto.Vuelva a colocar el
selector de programas en
posición OFF.
ESPT
BOTÃO INÍCIO (START)
Antes de iniciar o programa,
espere que o indicador
luminoso “STOP” acenda,
pressionando o botão
“START”.
Pressione para começar o
ciclo seleccionado (ao
seleccionar um ciclo, um
indicador luminoso
acenderá).
NOTA: DEPOIS DE
ACCIONAR O BOTÃO
DE INÍCIO, ESTE,
DEMORARÁ ALGUNS
SEGUNDOS PARA
COMEÇAR A
TRABALHAR.
Alterar a programação após
o início do programa
(PAUSA)
O programa pode ser
colocado no modo PAUSA a
qualquer momento durante
o ciclo de lavagem,
pressionando a tecla
“Start/Pause” durante dois
segundos. Quando a
máquina está no modo
pausa, os indicadores
luminosos “Tempo Restante”,
velocidade de
centrifugação e teclas de
opções piscarão.
Para recomeçar o
programa,pressione
novamente o botão “INÍCIO
/ PAUSA”.
Se desejar alargar ou anular
a duração de lavagem,
espere 2 minutos até abrir a
porta em segurança.
Após ter feito essa escolha,
feche a porta, pressione o
botão de Início, e este
continuará a funcionar até
ao fim.
CANCELANDO O PROGRAMA
Para cancelar o programa tem
de rodar o botão de selecção
de programas para a posição
“OFF”(desligada).
Isto feito,seleccione então um
programa diferente.
Volte a rodar o botão de
selecção de programas para a
posição “OFF” (desligada).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy GO W 1458 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy GO W 1458 in the language / languages: English, German, Portuguese, Spanish as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info