Manual Candy GO 166-86S (page 10 of 41) (English, Danish, Swedish, Norwegian, Finnish)

513685

Zoom out

Zoom in

1/41

min 50 cm

max 85 cm

+2,6 mt max

max 100 cm

min 4 cm

min 50 cm

max 85 cm

+2,6 mt max

max 100 cm

min 4 cm

Kiinnitä aaltomainen

pohjalevy koneen pohjaan

kuvan mukaisesti.

Liitä tulovesiletku

vesihanaan.

Laite täytyy liittää

vesijohtoverkostoon

käyttämällä uutta

täyttöletkua.Vanhaa

täyttöletkua ei saa käyttää.

TÄRKEÄÄ!

ÄLÄ AVAA

VESIHANAA VIELÄ.

Siirrä pesukone seinän

viereen.Tarkista, että letkut

eivät ole taitteilla.

Poistoletku kiinnitetään

kiinteään viemäriputkeen ,

vedenjuoksuputkeen tai

ripustetaan pesualtaan

reunaan.

Vedenjuoksuputken

halkaisijan on oltava

suurempi kuin poistoletkun.

Kaikissa asennustavoissa on

tarkistettava,etta

poistoputki on vähintään 50

cm lattiapinnan yläpuolella.

Tarvittaessa voidaan

käyttää apuna koneen

mukana toimitettua

letkunpidikettä.

Montera den räfflade,

porösa bottenplattan som

bilden visar.

Anslut tvättmaskinens

tilloppsslang till vattenkran.

Apparaten bör kopplas till

vattennätet med den

medföljande

påfyllningsslangen. Gammal

slang får ej användas.

OBS!

ÖPPNA INTE

VATTENKRANEN ÄNNU.

Ställ tvättmaskinen vid

väggen och kontrollera,att

det inte finns veck på

slangen.

Avloppsslangen ansluts till

ett fast avloppsrör,

vattenavrinningsrör eller

hängs över kanten på en

tvättho. Diametern på

vattenavrinningsröret skall

vara större än

avloppsslangens.

Oberoende av

installationssätt, skall

avloppsslangens utlopp

vara placerat minst 50 cm

över golvet.Vid behov kan

den medföljande styva

slanghållaren användas.

Montér den porøse

bundplade som vist på

tegningen.

Forbind tilgangs slangen til

hanen.

Når maskinen opstilles,

anbefaler vi at De anvender

den med leverede nye vand

tilslutnings slange, I stedet for

den gamle slange som sad

på Deres gamle apparat.

VIGTIGT:

LUK IKKE OP FOR

HANEN.

Placer maskinen der hvor

den permanent skal

stå.Placer afløbs slangen

over kanten på vasken eller

badekarret, pas på at

slangen ikke vrider eller er

knækket sammen.

Det er endnu bedre at

forbinde afløbet til en fast

installation. Røret som

slangen skal hægtes i skal

have en diameter der er

større end selve afløbs

slangen. Højden på den

faste Installation skal vare

min. 60 cm over sulvet.

For at undgå at slangen

knækker, kan denne

monteres i den

medfølgende bøjning.

DA NO

Fest den korrugerte

bunnplaten som vist på

figuren.

Kopl vannrøret til kranen.

Når maskinen skal oppstilles

anbefaler vi at De bruker

den leverte nye

vanntilslutningsslangen,i

stedet for den gamle

tilslutningsslangen som satt

på det gamle apparatet.

VIKTIG: SKRU IKKE PÅ

VANNET.

Plasser vaskemaskinen opp

mot veggen.Hekt

utløpsrøret til kanten av

badekaret, og påse at det

ikke er noen knekker eller

innsnevringer pa røret.

Det er best a kople

utløpsrøret til et fast utløp

med større diameter enn

utløpsrøret og en høyde pa

minst 50 cm. Bruk om

nødvendig plastrøret som

følger med.

Fix the sheet of corrugated

material on the bottom as

shown in picture.

Connect the fill hose

to the tap.

The appliance must be

connected to the water

mains using new hose-sets.

The old hose-sets should not

be reused.

IMPORTANT:

DO NOT TURN THE TAP

ON AT THIS TIME.

Position the washing

machine next to the wall.

Hook the outlet tube to the

edge of the bath tub,

paying attention that there

are no bends or

contractions along the tube.

It is better to connect the

discharge hose to a fixed

outlet of a diameter greater

than that of the outlet tube

and at a height of min. 50

cm. If is necessary to use the

plastic sleeve supplied.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Candy GO 166-86S in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Candy GO 166-86S Manual

Product: