308385

Candy go 1272d Manual

19
Zoom out
Zoom in
Previous page
1/41
Next page
36
L
EN
“CREASE GUARD” BUTTON
The Crease Guard function
(Not available on COTTON
programmes) minimizes
creases as much as possible
with a uniquely designed
anti-crease system that is
tailored to specific fabrics.
MIXED FABRICS - the water is
gradually cooled
throughout the final two
rinses with no spinning and
then a delicate spin assures
the maximum relaxation of
the fabrics.
DELICATE FABRICS – final two
rinses with no spinning and
then the fabrics are left in
water until it is time to
unload.When you are ready
to unload, press the "Crease
Guard" button – this will
drain.
WOLLENS/HAND WASH –
after the final rinse the
fabrics are left in water until
it is time to unload and the
button indicator blinking.
When you are ready to
unload, press the "Crease
Guard" button, this will drain
and spin ready for
emptying.
If you do not want to spin
the clothes and activate
drain only:
- Turn the programme
selector to the "OFF"
position;
- Select programme drain
only ;
- Switch on the appliance
again by pressing the
"Start/Pause" button.
37
FR
IT
TOUCHE “REPASSAGE FACILE”
Si vous utilisez cette touche
(Non disponible sur les
programmes COTON),il vous
sera possible de réduire la
formations des plis, selon le
programme choisi et la
nature du tissu lavé.
Tissu mixte et synthetique:
- le refroidissement de l’eau
sera fait graduellement pour
éviter les chocs thermiques;
- la vidange sera faite sans
aucune action mécanique
du tambour;
- une phase d’essorage
doux, pour assurer la
distension maximale des
fibres.
Tissu délicat:
- Votre lave-linge effectuera
les actions ci dessus
mentionnées, ensuite un
"arrêt cuve pleine" après le
dernier rinçage.
Laine et lavage a la main:
- Votre lave linge effectuera
un "arrêt cuve pleine".
Le indicateur d’option
clignote et le linge reste dans
l’eau du tambour.
Pour terminer le cycle des
tissus délicats, de la laine et
lavage a la main,les
opérations à accomplir sont
les suivantes :
1. Relâcher la touche de
repassage facile pour
terminer le cycle.
2. Sinon, vous pouvez
effectuer une simple vidange
- Tourner le sélecteur de
programme à la position
“OFF”;
- Sélectionner le programme
“Uniquement vidange” ;
- Allumer de nouveau la
lave-linge en appuyant sur
la touche “MARCHE/PAUSE”.
TASTO “STIRO FACILE “
Attivando questa funzione
(non disponibile per i
programmi cotone) è
possibile ridurre al minimo la
formazione di pieghe
personalizzando ulteriormente
il ciclo di lavaggio in base al
programma scelto ed al tipo
di biancheria da lavare.
In modo particolare per i
tessuti misti e sintetici l’azione
combinata di una fase di
raffreddamento graduale
dell’acqua, l’assenza di
rotazione del cesto durante
gli scarichi dell’acqua ed una
centrifuga delicata a bassa
velocità assicura la massima
distensione dei capi.
Per i tessuti delicati vengono
svolte le fasi già descritte
sopra per i tessuti misti ad
eccezione del
raffreddamento graduale
dell’acqua ma con
l’aggiunta di una fase di
fermo acqua in vasca con
stop dopo l’ultimo risciacquo.
Nel programma lana e
lavaggio a mano questo tasto
ha la sola funzione di lasciare i
capi immersi nell’acqua alla
fine dell’ultimo risciacquo al
fine di distendere
perfettamente le fibre.
Durante la fase di fermo
acqua in vasca la spia del
tasto lampeggia ad indicare
che la macchina è in pausa.
Per terminare il ciclo dei
tessuti delicati, della lana e
lavaggio a mano,le
operazioni possono essere:
- rilasciare il tasto per
terminare il ciclo.
Nel caso in cui si voglia
effettuare solo lo scarico:
- portare la manopola
programmi prima in posizione
di “OFF”;
- selezionare il programma
solo scarico ;
- riavviare la macchina
premendo nuovamente il
pulsante “AVVIO/PAUSA”.
DE
TASTE “LEICHTBÜGELN”
Diese Funktion (nicht
verfügbar für die
Programme KOCHWÄSCHE)
reduziert die Knitterbildung
durch die individuelle Wahl
der Programme und der
Wäscheart.
Im Besonderen für
Mischgewebe sorgt die
Kombination der langsamen
Abkühlphase verbunden mit
dem Stillstand der Wäsche
während des Abpumpens
und einem Schonschleudern
für die optimale Schonung
der Wäsche.
Für die Feinwäsche sind die
Phasen wie bei
Mischgewebe beschrieben,
mit Ausnahme der
Abkühlphase unter
Hinzunahme des
Wasserstopps nach dem
letzten Spülgang.
Für die Programme
Woolmark (Wolle) und
Handwäsche dient diese
Taste ausschließlich als
Spülstopp, um die Fasern zu
glätten.
In der Spülstopp-Phase
blinkt die Leuchtanzeige der
Taste, um anzuzeigen, dass
das Gerät sich in Pause
befindet.
Um die Feinwäsche bzw. das
Woll-oder Handwäsche-
Programm zu beenden,
können Sie wie folgt
vorgehen:
- Drücken Sie die Taste
Leichtbügeln zurück, um das
Programm mit Abpumpen
und Schleudern
zu beenden
Wenn Sie nur abpumpen
wollen:
- drehen Sie den
Programmwahlschalter auf
die Position OFF
- wählen Sie das Programm
Abpumpen
- schalten Sie das Gerät
durch erneutes Drücken der
Taste START/PAUSE ein
ES
TECLA “FÀCIL PLANCHA”
Con ayuda de esta tecla (no
disponible para los programas
ALGODON) podrá reducir la
formación de arrugas
personalizando
posteriormente el ciclo de
lavado según cual sea el
programa seleccionado y la
naturaleza del tejido que se
lave.
En particular, para los tejidos
sintéticos la acción
combinada de una fase de
enfriamiento gradual del
agua, la falta de acción
mecánica del tambor
durante el vaciado del agua
y una fase de centrifugado
suave a baja velocidad para
garantizar la distensión
máxima de las fibras.
Para los tejidos delicados,su
lavadora realizará las
acciones anteriormente
mencionadas para los tejidos
mixtos salvo el enfriamiento
gradual del agua y con la
adición de una fase de
parada de cuba llena tras el
último aclarado.
En el programa lana y lavado
a mano la única función de
esta tecla es la de dejar las
prendas inmersas en el agua
durante la última fase de
centrifugado para garantizar
la distensión máxima de las
fibras. Durante la fase de
parada de cuba llena el
piloto de la tecla parpadea
para indicar que la lavadora
está en pausa.
Para terminar el ciclo de
tejidos delicados, lana y
lavado a manodeberán
realizarse las siguientes
operaciones:
-Podrá soltar la tecla para
terminar el ciclo.
Si desease realizar sólo un
vaciado:
- Gira el mando selector de
programas a la posición
“OFF”.
- Seleccione el programa sólo
vaciado .
- Ponga en marcha la
lavadora pulsando de nuevo
el botón “Start/Pausa”.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy go 1272d at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy go 1272d in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info