Manual Candy GCS 9101A2T (page 13 of 198) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

620994

Zoom out

Zoom in

1/198

OPERATION

1. Open the door and load the drum with

laundry. Ensure that garments do not hinder

closure of the door.

2. Gently close the door pushing it slowly until

you hear the door 'click' shut.

3. Turn the Programme Selector dial to select

the required drying programme (see

Programme Guide).

4. If drying synthetics, acrylics or delicate

items, press the button to reduce the

heat level.

The indicator will light up when the machine is

in low heat setting. To deselect in the first few

minutes of the programme, press the

button , after this time reset the machine to

change the setting.

5. Press the button. The dryer will start

automatically and the indicator above the

button will be continuously lit.

6. If the door is opened during the programme

to check the laundry, it is necessary to press

to recommence drying after the door has

been closed.

7. When the cycle is nearing completion the

machine will enter the cool down phase, the

clothes will be tumbled in cool air allowing the

load to cool down.

8. Following the completion of the cycle the

drum will rotate intermittently to minimize

creasing. This will continue until the machine

is switched OFF or the door is opened.

Do not open the door during the automatic

programs in order to obtain a proper drying.

13 EN

WATER CONTAINER

The water removed from the laundry during the

drying cycle is collected in a container inside the

door of the dryer. When the container is full the

indicator on the control panel will light, and the

container MUST be emptied. However, we

recommend that the container is emptied after

each drying cycle.

NOTE: Very little water will collect during the first

few cycles of a new machine as an internal

reservoir is filled first.

To Remove the Container

1. Gently pull out the

t r a y u n t i l i t i s

completely removed.

Support the tray with

both hands. When it is

full the water container

will weigh about 4kg.

2. Til t th e wat er

container to empty the

water out through the

rear hole.

When emptyslide the

water container back

into position.

PUSH FIRMLY INTO

PLACE.

3. Press to restart

the cycle.

NOTE: If you have the

option of drainage near

the dryer it is possible

to use the discharge kit

to provide a permanent

drain for the water

collected by the dryer.

This will remove the

need to empty the

water tray. All the

i n f o r m a t i o n f o r

assembly of the kit is

contained in the kit

envelope.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Candy GCS 9101A2T in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 34,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Candy GCS 9101A2T Manual

Product: