620975

Candy GC 12102 D2 Manual

33
Zoom out
Zoom in
Previous page
1/41
Next page
64 65
EN
● Ensure that the water inlet
tap is turned on.
● And that the discharge
tube is in place.
PROGRAMME SELECTION
Refer to the programme guide
to select the most suitable
programme.
Turning the selector knob
required programme is
activate.
The display will show the
settings for the programme
selected.
Press the option buttons (if
required)
Then press the START button.
When the START button is
pressed the machine sets the
working sequence in motion.
The programme carries out
with the programme selector
stationary on the selected
programme till cycle ends.
Warning: If there is any break
in the power supply while the
machine is operating, a
special memory stores the
selected programme
and,when the power is
restored, it continues where it
left off.
● When the programme has
ended the word “End” will
appear on the display
● Wait for the door lock to be
released (about 2 minutes
after the programme has
finished).
● Switch off the machine by
turning the programme
selector to the “OFF”position.
● Open the door and remove
the laundry.
● Turn off the water supply
after every use.
FOR ALL TYPES OF
WASH CONSULT THE
PROGRAMME TABLE
AND FOLLOW THE
OPERATIONS IN THE
ORDER INDICATED.
PT
●
Certifique-se de que a
torneira de alimentação de
água esteja aberta.
●
Certifique-se também de
que o tubo de descarga
esteja bem colocado.
SELECÇÃO DE PROGRAMA.
Utilize o guia de programas para
seleccionar o programa mais
adequado.Rode o selector
requerendo o programa que
está activado.
No visor são apresentadas as
regulações para o programa
seleccionado.
Prima os botões de selecção de
opções (se for necessário)
Depois pressione o botão de
“INÍCIO”.Quando o botão de
“INÍCIO”for pressionado,a
máquina apresentará a
sequência do programa.
O botão mantém-se intacto,
mesmo quando o programa
está a decorrer.
Aviso: Se houver quebra de
corrente eléctrica enquanto
a máquina estiver a
funcionar, o programa
seleccionado fica registado
numa memória especial e,
quando a energia eléctrica
for restaurada o programa
continuará a partir do sítio
onde tinha ficado.
●
Quando o programa
chega ao fim, a indicação
“End” (fim) é apresentada no
visor
●
Espere que a porta que
está fechada abra (cerca de
2 minutos, depois do
programa ter terminado).
●
Desligue a máquina,
rodando o selector para a
posição “OFF”.
●
Abra a porta e retire a
roupa.
●
Desligue a torneira de
fornecimento de água após
cada utilização.
A TABELA DE
PROGRAMAS CONTÉM
INFORMAÇÕES SOBRE
TODOS OS TIPOS DE
LAVAGEM. CONSULTE-A
PARA ESCOLHER O
PROGRAMA ADEQUADO
À ROUPA QUE VAI LAVAR,
E SIGA AS OPERAÇõES
PELA ORDEM AQUI
APRESENTADA.
ES
● Asegúrese de que el grifo
del agua esté abierto,
● Que el desagüe esté en
posición correcta.
SELECCIÓN DEL PROGRAMA
Hace referencia a la tabla
de programas para
seleccionar el programa más
adecuado.
Girando el selector se activa
el programa elegido. En el
display se visualizarán los
parámetros del programa
elegido.
Pulsar las teclas de opciones
(si se desea)
Seleccionando la tecla
START la lavadora incia la
secuencia de lavado.
El ciclo de lavado
mantendrá el mando
programador fijo sobre el
programa seleccionado
hasta la finalización del
lavado.
Atención: Si hubiese un corte
en el suministro eléctrico
durante el funcionamiento
de la lavadora, una especie
de memoria conservará la
selección efectuada y, al
reiniciarse el suministro
eléctrico, la lavadora
continuará lavando desde el
punto en que se paró.
● Al término del programa
se visualizará la palabra
“End” en el display.
● Espere hasta que se
apague el piloto de puerta
asegurada (2 minutos
después de finalizar el
programa).
● Apague el aparato
colocando el mando
selector de programas en
posición “OFF”.
● Abra la puerta y extraiga
la ropa.
● Cierre el grifo del agua
PARA CUALQUIER TIPO
DE LAVADO, CONSULTE
SIEMPRE LA TABLA DE
LOS PROGRAMAS Y
SIGA LA SECUENCIA DE
LAS OPERACIONES TAL
COMO VIENE
INDICADO.
NL
●
Controleer of de
watertoevoerkraan open
staat.
●
En of de afvoerslang goed
is aangesloten.
PROGRAMMA SELECTEREN
Raadpleeg het programma-
overzicht voor het meest
geschikte programma.
Draai de programmaknop
naar het gewenste
programma.
Het display geeft de
instellingen van het gekozen
programma weer.
Druk op de keuze toetsen
(als dat nodig is)
Druk vervolgens op de START-
knop. Het indrukken van de
START-knop stelt de
wasmachine in werking.
Het programma draait met
de programmaknop
gepositioneerd op het
gekozen programma totdat
het programma eindigt.
Waarschuwing: Indien er een
onderbreking van stroom is,
teriwjld e amchine aan staat,
wordt het geselecteerde
programma opgeslagen in
een speciaal geheugen.
Wanneer de stroom is
hersteld, zal de machine
verder gaan met het
wasprogramma.
●
Als het programma is
beëindigd zal het woord
“End” in het display
verschijnen.
●
Wacht tot de
deurvergrendeling ontgrendelt
(circa 2 minuten na afloop van
het wasprogramma).
●
Draai de programmaknop
naar de UIT-stand (OFF) om
de machine uit te schakelen.
●
Open de deur en haal uw
wasgoed uit de machine.
●
Draai na het gebruik de
watertoevoer dicht .
VOOR ALLE SOORTEN
WASPROGRAMMA’S
RAADPLEEG HET
OVERZICHT EN VOER DE
HANDELINGEN UIT IN
DE AANGEGEVEN
VOLGORDE
FR
● Vérifier que le robinet d’eau
soit ouvert.
● Vérifier que la vidange soit
placée correctement.
SÉLECTION DU PROGRAMME
Sélectionnez le programme en
tournant le sélecteur de
programmes et en alignant le
nom du programme sur
l’indicateur.
L’écran affichera les réglages
du programme sélectionné.
Pressez les boutons d’options si
besoin
Appuyez sur le bouton " START "
et quelques secondes plus
tard, le programme se lance.
Le cycle de lavage se réalisera
avec la manette des
programmes arrêtée sur le
programme sélectionné jusqu'à
la fin de celui-ci.
Attention: En cas de coupure
de courant pendant un
programme de lavage,une
mémoire spéciale restaure le
programme sélectionné et,
lorsque le courant est rétabli,
reprend le cycle là où il s’est
arrêté.
● A la fin du programme,le
mot “End” apparaitra sur
l’écran.
● Lorsque le programme est
terminé:
● Attendez que le verrou de
porte se désactive. Le voyant
lumineux "" Témoin de
verrouillage de porte " s’éteint
après environ 2 minutes;
● Mettez la machine à l’arrêt
en tournant le sélecteur de
programme à la position OFF.
● Ouvrez la porte.
● Enlevez le linge.
● Fermer le robinet d’eau.
POUR TOUS LES TYPES DE
LAVAGE CONSULTER
TOUJOURS LE TABLEAU
DES PROGRAMMES ET
SUIVRE LA SEQUENCE
DES OPERATIONS
INDIQUEE.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy GC 12102 D2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy GC 12102 D2 in the language / languages: English, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info