466060

Candy FUNP611 Manual

25
Zoom out
Zoom in
Previous page
1/123
Next page
23
ENG
At the completion of the set duration, the timer will stop the oven and give an audible warning.
Also, the symbol (A) will begin to flash on the screen. After bringing the oven button and oven
thermostat button to 0 position, pressing any button of the timer will end the audible warning.
Also, the timer will be brought to manual use function.
Semi- Automatic Programming According to Cooking Period :
This function is used to cook in the desired time range.
The foods to be cooked are put into the oven. The oven is adjusted to
the desired cooking function. The oven thermostat is adjusted to the
desired degree depending on the dish to be cooked.
Keep pressing on the MODE button until you see "stop" on the
timer screen. When you see "stop" on the timer screen, the symbol (A)
will begin to flash. Adjust the cooking period for the food you wish to cook,
by using the (+) and (-) keys while the timer is in this position. Some time
after the adjustment operation is completed, the day’s time will appear on
the screen and the symbols (A) and will begin to continuously light on
the screen. While doing this, the oven will also start to operate.
Semi-Automatic Programming According to Finishing Time :
This function is used to cook according to the desired finishing time.
The food to be cooked is put into the oven. The oven is adjusted to the
desired cooking function. The oven thermostat is adjusted to the desired
degree depending on the dish to be cooked.
Keep pressing on the MODE button until you see "end" on the timer
screen. When you see "end" on the timer screen, the symbol (A) and the
day’s time will respectively begin to flash.
-
+
MODE
A
du
r
Figure 14
-
+
MODE
A
En
d
Figure 15
A cooking period between the time range of 0 and 10 hours can be set.
At the completion of the set duration, the timer will stop the oven and give an audible warning.
Also, the symbol (A) will begin to flash on the screen. After bringing the oven button and oven
thermostat button to 0 position, pressing any button of the timer will end the audible warning.
Also, the timer will be brought to manual use function.
Adjust the finishing time for the food you wish to cook, by using the (+) and (-) keys while the
timer is in this position. Some time after the adjustment operation is completed, the day’s time
will appear on the screen and the symbols (A) and will begin to continuously light on the
screen. While doing this, the oven will also start to operate.
You can set a time which can be up to 10 hours after the day’s time.
Audible Warning Time Adjustment is for warning purposes only. The oven will not
be activated at this function.
The audible warning time can be set to a time between the time range of 0 and 23.59.
When the time is up, the timer gives an audible warning and the symbol begins to flash
on the screen. Pressing any key will stop the audible warning and the symbol disappears
on the screen.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy FUNP611 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy FUNP611 in the language / languages: English, German, Spanish as an attachment in your email.

The manual is 6,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info