466065

Candy FS 828 Manual

13
Zoom out
Zoom in
Previous page
1/58
Next page
12 GB
Button for regulation and confirmation
SETTINGS: quantity/weight, temperature, programming cooking and end of cooking
time. Regulated by turning the button toward “-” or “+”
TO CONFIRM SETTINGS: press the button:
Oven selector
knob
Function selector
knob
Dispay panel: time, programming of cooking mode, indicator lights, cooking temperature
function and shelf positioning
CONTROL PANEL DESCRIPTION
DESCRIPTION OF THE DISPLAY
BEFORE USING THE OVEN FOR THE FIRST TIME
• PRELIMINARY CLEANING
- clean the oven before using for the first time:
. wipe over external surfaces with a damp soft cloth.
. Wash all accessories and wipe inside the oven with a solution
of hot water and washing up liquid.
. Set the empty oven to the maximum temperature and leave
on for about 1 hour, this will remove any lingering smells of
newness. Ensure that the room is well ventilated while this is
being done.
• THINGS TO REMEMBER
Confirmation of operation: modification must be confirmed
by pressing the central button.
Stopping the oven: this may be necessary if you have input
an incorrect instruction.
To stop the oven .... turn back the function selector knob
to the Stop Position.
Child safety device: To lock the oven controls, select the child
safety device. Refer to the section entitled "Programming - The
child safety device".
The cooling fan: this protects the control panel and electronics
from heat damage.
It begins and then stops automatically even when the oven is
switched off.
Oven lighting: By turning to the light symbol, you can switch
on the oven light when it is not in use.
When the oven is in use, the light stays on during all of the
oven functions and when the door is opened.
• CLOCK SETTING
When the oven is connected to the electricity supply or after a
long power cut, the clock must be re-set.
. To set the clock :
1-Turn the control knob to the "Clock" symbol :
2-When the minutes flash, set the central button by turning to the
"-" or "+" symbol. Confirm by pressing the central button.
3-The hours will then flash, set with the central button by turning
to the "-" or "+", confirm by pressing the central button.
4-Turn back the control to the STOP position, the new hour is set.
• LANGUAGE CHOICE
The pre-set language setting on the display panel is in Italian, but
it can be changed.
To change the language display, carry out the following
procedure :
1- Turn the programme selector knob to "Light" symbol.
2- Press the central button in and hold for 3 seconds. The display
panel will show ITALIANO. Turn the button until the required
language appears and confirm by pressing the same button.
The display will disappear.
3-Your selection is now confirmed. Turn the programme selector
knob back to the STOP position.
Programme symbol display: cooking
Textual zone
Indicator light:
rising temperature
Cooking temperature
ex.: 200°C
or grilling functioning
Cooking quantity
(persons or weight)
Time
ex.: 9 hours
Time
Timer and End
Programmation display:
cooking time, timer and
end
Selected cooking mode:
Auto: illuminated display,
Automatic mode
Auto off: manual mode
Indicator light:
child safety device
Oven
functioning
display and
recommended
livel position
L
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy FS 828 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy FS 828 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info