703553
14
Zoom out
Zoom in
Previous page
1/76
Next page
•This function is typically used with
“cooking time” function.
For example if the dish has to be
cooked for 45 minutes and needs
to be ready by 12:30, simply select
the required function, set the
cooking time to 45 minutes and the
end of cooking time to 12:30.
•At the end of the cooking set time,
the oven will switch off
automatically and an audible alarm
will ring.
•Cooking will start automatically at
11:45 (12:30 minus 45 mins) and
will continue until the pre-set end-
of-cooking-time, when the oven
will switch itself off automatically.
WARNING.
If the END of cooking is selected
without setting the length of
cooking time, the oven will start
cooking immediately and it will
stop at the END of cooking time
set.
3.4 USE OF TOUCH CONTROL CLOCK PROGRAMMER
FUNCTION
HOW TO ACTIVATE IT
HOW TO SWITCH ITOFF
WHAT IT DOES WHAT IT IS FOR
KEY LOCK
MINUTE
MINDER
COOKING
TIME
END OF
COOKING
•Child Lock function is
activated by touching Set (+)
for a minimum of 5 seconds.
From this moment on all other
function are locked and the
display will flash STOP and
preset time intermittently.
•Child Lock function is
deactivated by touching
touchpad Set (+) again for a
minimum of 5 seconds. From
this moment on all functions
are selectable again.
•Push the central button
1 times
•Press the buttons " " " "-+
to set the required time
•Release all the buttons
•When the set time as elapsed
an audible alarm is activated
(this alarm will stop on its own,
however it can be stopped
immediately by pressing the
button) SELECT.
•Sounds an alarm at the end of
the set time.
•During the process, the
display shows the remaining
time.
•Allows to use the oven as alarm
clock (could be activated either
with operating the oven or with
out operating the oven)
Push the central button 2 times
Press the buttons "-" or "+"to
set the lenght of cooking
required
Release all buttons
Set the cooking function with
the oven function selector
•When the time is elapsed the
oven will switch off
automatically.
Should you wish to stop cooking
earlier either turn the function
selector to 0, or set time to 0:00
(SELECT and "-" "+" buttons)
It allows to preset the cooking
time required for the recipe
chosen.
To check how long is left to run
press the SELECT button 2 Times.
To alter/change the preset time
press SELECT and "-" "+"
buttons.
•Push any button to stop
the signal. Push the central
button to return to the clock
function
•At the time set, the oven
will switch off. To switch
off manually, turn the oven
function selector to
position O.
•Enables you to set the end of
cooking time
•To check the preset time push
the central button 3 times
•To modify the preset time
press buttons SELECT + " " " "-+
•Push the central button 3
times •Press the buttons " "-
" " to set the time at which you+
wish the oven to switch off
•Release the buttons
•Set the cooking function with
the oven function selector
EN 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy FCT612X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy FCT612X in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 10,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info