466032
10
Zoom out
Zoom in
Previous page
1/24
Next page
Fixing the vitroceramic hob:
Fixing the solid hotplate hob:
h>40mm
h
Figure C
Figure D
Figure E
h<40mm
h
ENG
In order to prevent leakage of any liquids on the counter, a special sealing putty is supplied
together with your oven. Apply this putty around the clearance on the kitchen counter. Extend
the five-piece putty by stretching and apply it around the clearance. Place the hob on it, as
indicated in the FigureA. Make sure to fit all four clamps by using one screw for exch as shown in
the Figure C. In case the thickness of the kitchen counter is less than 40mm, use the clamp
as shown in the Figure E. After fitting your hob into its place, neatly remove the
excess sealingputty around the sides with the helpof a spatula Figure D.
·
·
·
Apply the one-sided self-adhesive sealing tape supplied all the way round the lower edg
Screw the 4 worktop mounting brackets on theside walls of product.
Place the hob into the opening on the worktop.
ε
of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it.
Installation steps:
1.Place the hob into the opening on worktop. The size of opening is given in Figure A.
Fordetails, see the headings either or
.
2.Connect the hob to the oven using the the plug given on the hob. The socket for plug is
placed on the rear panel of oven.
3.Connect the oven to the electrical supply.
4.Place the oven into its built-in niche. Either placement in Figure A or placement in Figure B
is applicable depending on the size of cabinet opening. For details, see the heading
.
Fixing the solid hotplate hob Fixing the vitroceramic
hob
Fixing
the oven
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy FCO 404X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy FCO 404X in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info