513761
18
Zoom out
Zoom in
Previous page
1/41
Next page
34
35
L
EN
“DIGITAL DISPLAY
The display’s indicator
system allows you to be
constantly informed about
the status of the machine:
1) SPIN SPEED
Once the programme has
been selected, the
maximum spin speed
allowed for that programme
appears on the display.
Pressing the spin button will
reduce the speed by 100
rpm each time the button is
pressed. The minimum
speed allowed is 400 rpm, or
it is possible to omit the spin
by pressing the spin button
repeatedly.
2) DELAY START LIGHT
This flashes when delay start
has been set.
3) DOOR LOCKED
INDICATOR
The “Door Locked” indicator
light is illuminated when the
door is fully closed and the
machine is ON.
When START is pressed on
the machine with the door
closed the indicator will flash
momentarily and then
illuminate.
If the door is not closed the
indicator will continue to
flash.
A special safety device
prevents the door from
being opened immediately
after the end of the cycle.
Wait for 2 minutes after the
wash cycle has finished and
the Door Locked light has
gone out before opening
the door.At the end of cycle
turn the programme
selector to OFF .
PT
VISOR “DIGITAL
O sistema de transmissão de
informações do visor permite-lhe
manter-se constantemente
informado sobre o estado da
máquina:
1) VELOCIDADE DE
CENTRIFUGAÇÃO
Depois de o programa ter sido
seleccionado,é apresentada no
visor a velocidade de
centrifugação máxima admitida
para esse programa. Cada
pressão no botão de selecção
da velocidade de
centrifugação reduz a
velocidade de centrifugação
em 100 rpm. A velocidade de
centrifugação mínima admitida
é de 400 rpm, sendo que,em
alternativa,também é possível
suprimir a centrifugação final,
para o que basta premir
repetidamente o botão de
selecção da velocidade de
centrifugação.
2) INDICADOR LUMINOSO DE
ARRANQUE RETARDADO
Este indicador luminoso fica a
picar sempre que tiver sido
programado um arranque
retardado do programa.
3)
INDICADOR DE FECHO DE
PORTA
O indicador luminoso de
“fecho de porta” acende
quando a porta está
totalmente fechada e a
máquina está pronta para
começar.
Quando o botão de “INÍCIO”
é pressionado com a porta
da máquina fechada, o
indicador luminoso piscará
momentâneamente e depois
ficará ligado.
Se a porta não estiver
fechada, o indicador
luminoso continuará a piscar.
Um dispositivo especial de
segurança previne que a
porta abra de imediato ao
fim do ciclo de lavagem.
Espere 2 minutos depois do
ciclo de lavagem ter
terminado, e a luz de fecho
de porta desligar-se-á antes
da porta se abrir. No fim do
ciclo de lavagem,rode o
selector de programas para a
posição “OFF”.
ES
DISPLAY DIGITAL
El sistema de aviso del display
permite estar constantemente
informado del funcionamento
del aparato:
1) VELOCIDAD DE
CENTRIFUGADO
Una vez seleccionado el
programa,en el display
aparecerá la máxima
velocidad de centrifugado
permitida para dicho
programa.Pulsando
repetidamente el botón de
centrifugado, la velocidad
disminuirá 100 vueltas/minuto
cada vez. La velocidad
mínima permitida es de 400
v/m, o bien es posible omitir el
centrifugado pulsando
repetidamente el botón de
selección de centrifugado.
2) LUZ INDICADORA DE INICIO
RETARDADO
Parpadea cuando se ha
seleccionado el programa de
inicio retardado
3)
PILOTO SEGURIDAD PUERTA
El piloto se ilumina cuando la
puerta está correctamente
cerrada y la máquina está
conectada.
Una vez pulsada la tecla
START/PAUSA, al principio el
piloto parpadea para
después quedar
permanentemente iluminado
hasta que finaliza el lavado.
En el caso de que la puerta
no esté correctamente
cerrada el piloto continuará
parpadeando.
Un dispositivo de seguridad
especial impide la apertura
inmediata de la puerta al
terminar el ciclo de lavado,
espere 2 minutos para que se
apague el piloto y apague la
lavadora colocando el
mando selector de
programas en la posición
"OFF".
DE
DISPLAY “DIGIT”
Die Anzeigen im Display
geben Ihnen ständig Auskunft
über die gerade
durchgeführten Funktionen
des Gerätes.
1) SCHLEUDERDREHZAHL
Sobald das Programm
gewählt wurde,erscheint auf
dem Display die
höchstmögliche Tourenzahl
für dieses Programm. Durch
wiederholtes Drücken der
Taste wird die
Schleuderdrehzahl jeweils um
100 U/Min herabgesenkt. Die
Mindestdrehzahl beträgt 400
U/Min, es ist jedoch auch
möglich, den Schleudergang
ganz zu unterdrücken, wenn
man die Taste
Schleuderdrehzahl wiederholt
drückt.
2) ANZEIGE
STARTZEITVORWAHL
Sie blinkt, wenn eine
Startzeitvorwahl eingestellt ist.
3) LEUCHTANZEIGE TÜR
GESCHLOSSEN
Die Anzeige leuchtet,wenn die
Tür korrekt geschlossen ist und
das Gerät eingeschaltet ist.
Nach Drücken der Taste
START/PAUSE blinkt die Taste
zuerst, dann leuchtet sie
permanent bis zum
Programmende.
Wenn das Bullauge nicht
korrekt geschlossen wurde,
blinkt die Leuchtanzeige weiter.
Eine spezielle
Sicherheitsvorrichtung
verhindert,dass das Bullauge
unmittelbar nach dem
Programmende geöffnet
werden kann.Warten Sie ca. 2
Minuten,bis die Leuchtanzeige
ausgeht und schalten Sie dann
das Gerät durch Drehen des
Programmwahlschalters auf die
Position AUS ab.
SL
DIGITALNI PRIKAZOVALNIK
Sistem prikazovanja vas sproti
obve‰ãa o vseh parametrih
pranja:
1) HITROST CENTRIFUGIRANJA
KO izberete program, se na
prikazovalniku prikaÏe najvi‰ja
dovoljena hitrost
centrifugiranja za izbrani
program. S pritiskom na tipko
za nastavljanje hitrosti
centrifugiranja lahko to hitrost
zniÏate; ob vsakem pritisku na
tipko se vrednost zmanj‰a za
100 vrt./min. NajniÏja moÏna
hitrost centrifugiranja je 400
vrt./min, ãe pa ‰e enkrat
pritisnete na tipko za
nastavljanje hitrosti
centrifugiranja, centrifugiranje
prekliãete.
2) LUâKA ZA ZAMIK VKLOPA
âe je nastavljen ãasovni
zamik vklopa, luãka utripa.
3) LUâKA 'ZAKLENJENA VRATA'
Luãka se osvetli, ko pravilno
zaprete vrata in vklopite stroj.
Ko pritisnete na tipko START,
medtem ko so vrata zaprta,
luãka kratek ãas utripa, nato
pa ostane osvetljena.
âe vrata niso pravilno zaprta,
luãka ‰e naprej utripa.
Posebna varnostna naprava
prepreãuje takoj‰nje
odpiranje vrat po koncu
programa. Poãakajte 2 minuti
in ko luãka ugasne, lahko
odprete vrata. Ko je program
pranja zakljuãen, obrnite
stikalo programatorja na OFF.
1
2
3
4
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy EVO4 1072 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy EVO4 1072 in the language / languages: English, German, Portuguese, Spanish as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info