541703
7
Zoom out
Zoom in
Previous page
1/76
Next page
USE THE DISHWASHER
Technical data :
Place load EN50242 6 Drainage pump power 30 W
Capacity with pans & dishes 4 persons Max power absorbed 2050 W
Water supply pressure (litres) 3 Water pressure mini 0,08 - max 0,8 MPa
Power 1900 W
Wash pump power 150 W Fuse (amp) 10 A
DISHWASHER CONTROLS
A Programme selection indicator lights
B Programme selection button
C Programme description
D On/off button
SELECTING THE PROGRAMMES AND SPECIAL FUNCTIONS
The dishwasher and the oven cannot be used simultaneously.
Setting a programme
Open the door and press the On/off button ; the 4 Program selection LEDs start flashing.
- Set the required programme by pressing Programme selection button, LED of the chosen programme will turn on (2 LEDs for COLD
RINSE programme).
- Close the door (after audible signal), the chosen programme will start automatically.
Opening the door
Grip the handle in the front panel and pull forward. If the machine
comes open while it is working, an electrical safety device
automatically switches everything off. For the machine to work
properly, the door should not be opened while it is in operation.
Closing the door
Place the basket in the dishwasher. Make sure that the spray arm
is free to rotate and is not obstructed by cutlery, crockery or pans.
Closethedoor,pressingonittomakesureitisfirmlyshut.
Interrupting a programme
lt is not recommended that the door be opened while a programme
is running, and especially not during the main wash phase and
final drying.
However, the appliance stops automatically when the door is
opened.
When the door is closed again, the programme continues
automatically.
If you wish to change or cancel a programme that is running, carry
out the following procedure:
. open the door, keeping the Programme selection button "P"
pressed in until all 4 indicator lights are flashing. The current
programme is cancelled. A new setting can now be made.
Before starting a new programme, you should check that there is
still detergent in the dispenser. If necessary, top up the dispenser.
WARNING: if the door is opened during the drying phase, an
intermittent audible signal is activated to advise that the cycle is
not yet completed.
End of programme
The end of the programme is indicated by an audible signal. When
the door is opened the programme selection indicator lights start
flashing. Release the On/off button.
Deactivating the audible signal
The audible function can be deactivated in the following way:
- press the On / Off button,
- wait till the programme LEDs blink,
- within 2 minutes, press and keep pressed for at least 30 seconds
the Programme Selection button (the programme LEDs will still
blink and an intermittent audible signal is heard).
- Once the first two LEDs on the left are illuminated without blinking
and the audible signal is off, release the button (the audible
signal function is active).
- Press again the Programme Selection button, the first two LEDs
on the left will go off and the other two LEDs will turn on (the
audible signal function is deactivated).
- An audible signal will confirm that the setting is completed
- To set again the audible signal function repeat the whole
procedure.
USE THE DISHWASHER
Fault Signals
If malfunctions or faults occur when a program is running, the
LED that corresponds to the selected cycle (2 LEDS for COLD
RINSE programme) will blink rapidly and an audible signal will be
activated.
In this case, turn the dishwasher off by pressing the On / Off
button. After checking to make sure the water inlet hose tap is
open, that the drain hose is not bent and that the siphon or filters
are not clogged, re-start the selected program. If the anomaly
persists, contact Customer Service.
Important !
To ensure the correct operation of the anti-overflow safety
device, it is recommended not to move or to tilt the dishwasher
during operation.
If it is necessary to move or to tilt the dishwaher, first make
sure the washing cycle is finished and that no water is left
in the tank.
Attention - The dishwasher is equipped with an anti-overflow
safety device which in the event of anomaly intervenes by
evacuating water in excess.
5 GB
The filtering system is composed
of :
- a central filter cup which traps the
largest food particles.
- a flat filter which continuously filters
the washing water.
- the micro filter, situated under the
flat filter, which traps the smallest food particles ensuring a perfect
rinse.
For best results, the filter unit should be checked and cleaned
after each wash.
To remove the filter unit, simply grip the handle and lift the whole
unit out.
The central cup is just resting on top for easy cleaning.
The dishwasher is fitted with a self cleaning micro filter, which
only requires checking about once every 15 days.
However, it is advisable to check after every wash, that the central
cup and the flat filter are not clogged.
NB : After cleaning the filters, make sure that they are correctly
reassembled, one inside the other, and that the flat filter is properly
positioned at the bottom of the dishwasher.
A poor seating of the filter unit could have an adverse effect on
the efficiency of the appliance.
Important : Never use the dishwasher without filter.
PRELIMINARY OPERATIONS AND CLEANING
THE FILTER UNIT
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy DUO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy DUO in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Spanish as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info