If the use of the timer is not required and you do not want to
programme cooking time, turn timer knob to the “ ” position.
Some electric ovens have a timer which must be set at the time at
which cooking must stop. This control allows for the
desired
cooking time to be programmed. The oven will automatically
switch off at the end of the set time.
The timer will count down from the set time, return to the “ O ”
position, and switch off automatically. For normal use of the oven,
set the timer to the “
O ” position and it will switch off automatically.
It can then be used by manual control.
To programme cooking time for the
gas oven, turn dial round completely,
and then turn it back to the required
time. When the time has elapsed, the
signal will ring for a few seconds.
USING THE MINUTE TIMER
USING THE END OF COOKING TIMER
Oven Function
Position
Not in function
Grill heater
Lower and upper heating element
Lower heating element
Upper heating element
Lamp
Grill heater and fan
Fan
Lower heating element and fan
Upper heating element and fan
Upper heating element, lower heating element and fan
Turn spit and grill heater
Toswitch off the cook top, turn the knob to "O".
•The oval heating zone consists of two heating areas: a circular
area and an oval shaped section. Turn the control knob from 1 to
12 to regulate the circular area. To operate the oval section, simply
turn the control knob
to position12 and then select a position from
1 to 12.
•The heating area consists of two concentric zones. The inner
circle is activated when the knob is turned to any of the positions
from 1 to 12.The outer ring will only be activated when the control
is turned beyond 12
up to a maximum power.
Mains power to the electric heaters is
controlled by the timer. A correct timer
position should be selected before
using the oven.
The timer guarantees that the oven will
remain switched on for the time
required. You can adjust the timer up to
90 minutes.
ELECTRIC OVEN
USE OF THE ELECTRONIC PROGRAMMER
WARNING : the first operation to carry out after the oven has been installed or following the interruption of power supply (this is recognizable the display pulsating and showing )
is setting the correct time. This is achieved as follows
• Press and hold the TIMER
and END buttons ( and )
• Set time with buttons
• Release all buttons
ATTENTION the oven only operates if set on manual function or preset time.
N.B.: on some models the symbols
are replaced by + and - .
• Sounds an alarm at the end of the set time.
• Tocheck how long is left to run press the
button
FUNCTIONHOW TO ACTIVA
HOW TO SWITCH IT OFF
WHAT IT DOESWHAT IT IS FOR
MINUTE MINDER
•Allows to use the oven as alarm clock (could be activated either with operating the oven
or with out operating the oven)
•Press and hold the button
•Press the buttons or
to set the required time
•Release all the buttons
•For cooking the desired recipes
MANUAL
FUNCTION
•Turn the oven function
selector to position“O”
•Enables you to operate the oven.
COOKING
TIME
•At the end of the cooking set time, the oven will switch off automatically and an audible
alarm will ring.
•When the time is elapsed the
oven will switch off
automatically. Should you
wish to stop cooking earlier
either turn the function
selector to 0, or set time to
0:00(TIMER and
buttons)
•It allows to preset the cooking time required
for the recipe chosen.
•To check how long is left to run press the
TIMER button.
•To alter/change the preset time press TIMER
and buttons
END OF
COOKING
•This function is typically used with “cooking time” function. For example if the dish has to
be cooked for 45 minutes and needs to be ready by 12:30, simply select the required
function, set the cooking time to 45 minutes and the end of cooking time to 12:30.
•Cooking will start
automa-tically at 11:45 (12:30 minus 45 mins) and will continue until the
preset end of cooking time, when the oven will switch itself off automatically
WARNING!
If the END of cooking is Selected without setting the length of cooking time, the oven will
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Candy CVM6629PW at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Candy CVM6629PW in the language / languages: English as an attachment in your email.
The manual is 0,6 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
