817918
74
Zoom out
Zoom in
Previous page
1/140
Next page
!
74
! Proceed as follows to set a delayed start:
- Select a programme.
- Press the DELAY START button (each
time the button is pressed the start will
be delayed by 3, 6 or 9 hours
respectively and the corresponding time
indicator light will light up).
- Press START/PAUSE button to
commence the delay start operation
(the indicator light associated with the
selected delay start time will blink). At
the end of the required time delay the
programme will start.
! It is possible to cancel the DELAY
START by turning the programme
selector to OFF.
! To set a timed drying, press this button
until the corresponding indicator light to
the desired duration will light on.
! It's possible transform a cycle from
automatic to timed, up to 3 minutes after
the start of the cycle.
! After this selection to reset the automatic
drying functioning is necessary to switch
off the dryer.
! In case of incompatibility, all indicator
lights flash quickly for 3 times.
! This button allows to set the desired
dryness level editable option up to 3
minutes after the starting of the cycle:
Ready to Iron: it leaves the garments
slightly wet to facilitate ironing.
Dry Hanger: to get garment ready to
be hang.
Dry wardrobe: for laundry that can be
directly stored.
Extra-dry: to get completely dry
garments, ideal for full load.
! This appliances is equipped with Drying
Manager function. On automatic cycles,
each level of intermediate drying, prior to
the reaching the selected one, is indicated
by flashing the light indicator corresponding
to the degree of drying reached.
In case of incompatibility, all indicator
lights flash quickly for 3 times.
It lights up when the START/PAUSE button
has been pressed.
The indicator lights are illuminated to show
the duration selected by the relevant
button.
The indicator lights display the degrees
of dryness that can be selected by the
relevant button.
! Each time the DELAY START button is
pressed the indicator lights show how
many hours of delay you chosen (3, 6 or
9 hours) and the countdown until the end
of it.
Opening of the porthole with delayed
start set, after re-closing the porthole,
press START/PAUSE again to resume
the counting.
TIME CYCLE SELECTION button
DRYING SELECTION button
START PAUSE indicator light
TIME CYCLE SELECTION
indicator lights
DRYING SELECTION indicator
lights
DELAY START TIME / DRYING
STAGE indicator lights
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy CSE H8A1LE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy CSE H8A1LE in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 22.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Candy CSE H8A1LE

Candy CSE H8A1LE User Manual - Dutch, Portuguese - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info