QUICK 2 IRON button
Press the button to select or deselect this function
The QUICK 2 IRON function (not available on COTTONS programmes) minimizes creases
as much as possible with a uniquely designed anti-crease system that is tailored to specific
fabrics.
MIXED FABRICS and SYNTHETICS - the water is gradually cooled throughout the final two
rinses with no spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS (excluding WOOLLENS programme) – final two rinses with no spinning
and then the fabrics are left in water until it is time to unload. When you are ready to unload,
press the QUICK 2 IRON button – this will drain and spin ready for emptying.
WOOLLENS - at the end of the final rinse, the fabrics are left in water until it is time to unload.
When you are ready to unload, press the QUICK 2 IRON button – this will drain and spin
ready for emptying.
If you do not want to spin the clothes and activate drain only:
◆ Turn the appliance off by pressing the on / off button;
◆ Select Programme Z;
◆ Switch on the appliance again by pressing the on / off button.
D
8
E
PROGRAMME Selector
Note: never turn the dial anti-clockwise (Turn it
clockwise and do not press the on/off button before
selecting the programme.)
The tables in the washing section describe the various programmes and give the number or
symbol to select for them.
IMPORTANT : IF YOU NEED TO CHANGE A PROGRAMME THAT
HAS ALREADY STARTED – SWITCH OFF THE MACHINE BY THE
ON / OFF BUTTON AND THEN MOVE THE PROGRAMME DIAL
TO THE CORRECT POSITION. IF YOU DO NOT PRESS “OFF”
BEFOREHAND, THE DIAL WILL AUTOMATICALLY MOVE TO ITS
INITIAL POSITION.
WASH TEMPERATURE selector
Can be turned in either direction
This washing machine is equipped with this device for
setting the wash temperature you want. We recommend
that the temperature shown on the label inside garments
should never be exceeded.
The most suitable temperature and cycle for each type of
fabric is shown in the programme guide.
To protect fabrics, if the variable temperature dial has
accidentally been set higher than that stated in the
programme guide, the machine will lower the temperature automatically.
L
I
9
QUICK 2 WASH button
Press the button to select or deselect this function
Pressing this button reduces the time of the wash programme by a maximum of 50 minutes
depending on the programme and the temperature selected. The QUICK 2 WASH button can
be used for washing loads of 1 to 6 kg. This option may only be utilised on cottons and
synthetics programmes.
VARIABLE SPIN SPEED selector
Can be turned in either direction
The spin stage plays a very important role in preparing the
laundry for efficient drying and your model offers maximum
flexibility to suit all your requirements.
The selector can be turned to reduce the maximum spin
speed, right up to eliminating the spin completely (position ).
In programmes for mixed fibres, synthetics and delicates, the
washing machine automatically lowers the spin speed.
In order not to damage fabrics, it is not possible to increase
this spin speeds.
Note: this model is fitted with an electronic device that
checks the load is balanced correctly. If the load is
slightly unbalanced the machine will re-balance it
automatically to carry out the normal spin.
If, after several attempts, balance is not restored, a
reduced spin speed will be used.
If loads are seriously unbalanced the spin stage will be
cancelled.
This helps limit vibration, reduce noise output and
improve the washing machine’s lifespan.
H
