513781
7
Zoom out
Zoom in
Previous page
1/32
Next page
7
GB
This booklet contains important instructions concerning the use of your appliance.
These instructions cover a number of appliances, therefore depending on the type of appliance,
some details may vary slightly.
Keep this booklet for consultation and if you sell the appliance give it to the new buyer.
READ CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE.
- ALL MAINTENANCE OPERATIONS, INCLUDING REPLACEMENT OF THE POWER SUPPLY CABLE, SHOULD THIS
BECOME NECESSARY, MUST BE CARRIED OUT BY THE AFTER-SALES SERVICE OR A QUALIFIED ELECTRICIAN.
This appliance is intended to come into contact with foodstuffs and conforms to D.L. 108 of 25.01.1992 (European Directive
89/109/EEC).
This appliance has been designed, manufactured and retailed in compliance with:
LOW VOLTAGE Directive 73/23/EEC
EMC Directive 89/336/EEC
Marking Directive 93/68/EEC
Energy Efficiency Directive 96/57/EEC
ENVIRONMENTAL INFORMATION
This appliance has been designed and manufactured taking into account the need to safeguard the environment.
To ensure the same care when of scrapping, given the presence of pollutants or inflammable materials such as lubrication oil in the
compressor, dispose of the appliance with care, delivering it to your local authorized collection centre for waste disposal and
scrapping.
This appliance does not contain CFCs (the refrigerant circuit contains R134a) or HFC (the refrigerant circuit contains R600a –
ISOBUTANE). To check which gas your appliance contains, refer to the appliance data plate.
For appliances with ISOBUTANE (R600a)
Isobutane is a naturally occurring low environmental impact gas. Caution is required, however, because Isobutane is flammable.
Therefore, before connecting the appliance to the power supply, it is essential to ensure that refrigerant pipelines are not damaged.
INSTALLATION
- Appliance installation should be carried out by two persons in order to avoid injury to persons or damage to objects.
The appliance must be installed upright on a strong, sturdy surface. This is the only way to guarantee no obstacles in the refrigerant
circuit. Use the adjustable feet (V) to level the appliance.
- Do not expose the appliance to high ambient temperatures or direct sunlight.
Ideally, the appliance should be installed in a cool, dry, well ventilated area, away from sources of heat such as radiators, heaters or direct
sunlight. Do not place any heat-producing appliances (microwave ovens, toasters, etc.) on top of the refrigerator/freezer.
- For the climatic class of your appliance, refer to the data plate affixed to the rear of the appliance: fig.1 (W)
if “SN”: appliance operates at ambient temperatures between +10°C and +32°C;
if “N”: appliance operates at ambient temperatures between +16°C and +32°C;
if “ST”: appliance operates at ambient temperatures between +18°C and +38°C;
if “T”: appliance operates at ambient temperatures between +18°C and +43°C;
- Never obstruct the air vent fig.1 (F). For appliances not equipped with an air vent, ensure sufficient space is left between the rear of the
freezer and the wall so as to allow hot air to exit freely.
Leave a space of at least 20mm between the rear of the appliance and the wall, and 100mm between the top of the appliance and any
overhead wall units. Use the spacers if supplied. fig.1 (U).
- Ensure easy access to the power socket so that the appliance can be disconnected from the mains when necessary.
IMPORTANT!
Wait at least two hours before connecting the appliance to the power supply in order to ensure the refrigerant circuit is fully
efficient and avoid possible malfunctions.
RATING PLATE
The identification plate is affixed to the rear of the (W) appliance.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy CHF 220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy CHF 220 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info