621258
16
Zoom out
Zoom in
Previous page
1/96
Next page
To set the cooking time, turn dial one
complete revolution and then position the
index to the required time. When the time
has lapsed, the signal will ring for a few
seconds.
USING THE MINUTE TIMER USING THE END OF COOKING TIMER
USE OF THE ELECTRONIC PROGRAMMER
10
20
30
40
50
60
70
80
90
100
110
120
16 GB
This control enables to set the desired
cooking time (max. 120 min.) the oven
will automatically switch off at the end of
the set time.
The timer will count down from the set
time return to the O position and switch
off automatically.
For normal use of oven set the timer to
the position.
To set the oven ensure the timer is not
on the O position.
Analog Timer Setting
When you push the knob, the minute arrow goes one minute forward. If you keep the knob
pressed, the arrows move quickly forward.
Hours hand Minutes hand Push Knob
FUNCTION
HOW TO ACTIVATE IT
MINUTE
MINDER
COOKING
TIME
END OF
COOKING
MANUAL
FUNCTION
HOWTO SWITCH ITOFF WHAT IT DOES WHAT IT IS FOR
•Push the central button
1 times
•Press the buttons or
to set the required time
•Release all the buttons
•When the set time as
elapsed an audible alarm
is activated (this alarm will
stop on its own, after
7 minutes however it can be
stopped immediately by
pressing the button) SELECT.
•Sounds an alarm at the
end of the set time.
•During the process, the
display shows the
remaining time: min, sec.
•Allows to use the oven as
alarm clock (could be
activated either with
operating the oven or with
out operating the oven)
•Push the central button
2 times
•Press the buttons or
to set the lenght of
cooking required
•Release all buttons
•Set the cooking function
with the oven function
selector
•When the time is elapsed
the oven will switch off
automatically. Should you
wish to stop cooking earlier
either turn the function
selector to 0, or set time
to 0:00 (SELECT and
buttons)
•It allows to preset the
cooking time required
for the recipe chosen
•To check how long is left
to run press the SELECT
button 2 Times.
•To alter/change the
preset time press SELECT
and buttons
•Push any button to stop
the signal. Push the central
button to return to the clock
function
•Push the central button
3 times
•Press the buttons
to set the time at which
you wish the oven to
switch off
•Release the buttons
•Set the cooking function
with the oven function
selector
•Push the central button 1 times
•Set time with buttons.
•Release all buttons.
ATTENTION the oven only operates if set on manual function or preset time.
N.B.: on some models the symbols are replaced by - and + .
•At the time set, the oven
will switch off. To switch
off manually, turn the oven
function selector to
position O.
•Enables you to set the
end of cooking time
•To check the preset time
push the central button
3 times
•To modify the preset
time press buttons
SELECT +
WARNING : the first operation to carry out after the oven has been installed
or following the interruption of power supply (this is recognizable the
display pulsating and showing
12:00 ) is setting the correct time. This is
achieved as follows
Push the central button
1 times
•Set the cooking function
with the oven function
selector
•Enables you to operate
the oven.
•For cooking the desired
recipes
•Turn the oven function
selector to position O.
SETTING THE CORRECT TIME
•This function is typically used
with “cooking time” function.
For example if the dish has to
be cooked for 45 minutes and
needs to be ready by 12:30,
simply select the required
function, set the cooking time
to 45 minutes and the end of
cooking time to 12:30.
•At the end of the cooking set
time, the oven will switch off
automatically and an audible
alarm will ring.
•Cooking will start
automatically at 11:45 (12:30
minus 45 mins) and will
continue until the pre-set end-
of-cooking-time, when the
oven will switch itself off
automatically.
WARNING.
If the END of cooking is
selected without setting the
length of cooking time, the
oven will start cooking
immediately and it will stop
at the END of cooking time
set.
KEY LOCK
•Child Lock function is
activated by touching Set (+)
for a minimum of 5 seconds
until the Child Lock symbol
is displayed. From this
moment on all other function
are locked.
•Child Lock function is
deactivated by touching
touchpad Set (+) again for a
minimum of 5 seconds until the
Child Lock symbol switches
off. From this moment on all
functions are selectable again.
L1, L2, L3 SET ACUSTIC SIGNAL
• Push the central button 5 times.
• Set time with buttons.
• Release all buttons.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Candy ACOM 609XM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Candy ACOM 609XM in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 13,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info