Manual Candy 2d 966 x (page 12 of 51) (English, German, Dutch, French, Italian, Portuguese, Spanish)

330332

Zoom out

Zoom in

1/51

• This function is typically

used with “cooking time”

function. For example

if the dish has to be cooked

for 45 minutes and needs

to be ready by 12:30,

simply select the required

function, set the cooking

time to 45 minutes and the

end of cooking time to

12:30.

• Cooking will start automa-

tically at 11:45 (12:30

minus 45 mins) and will

continue until the pre-set

end-of-cooking-time, when

the oven will switch itself

off automatically.

WARNING.

If the END of cooking is

selected without setting

the length of cooking time,

the oven will start cooking

immediately and it will

stop at the END of

cooking time set.

• To be set together with

cooking time duration.

• After turning the function

selector (either than

or ) and after set-

ting the cooking time ( as

explained above).

• Set the end of cooking

time as follows:

- Press the button C

- Press the button E or F

to set the end of cooking

time.

• Confirm your choice by

pressing the button A; the

‘A’ symbol will appear on

the display and the oven

will begin wait mode.

• The display will alternate

by showing temperature

and time set.

• At the set time the oven

will switch itself on, the ‘A’

symbol will go off and the

‘ ’ symbol will be come

on.

11 GB

If the function is not confirmed by pressing A after 1 minute the oven switches itself

off and the display will show ‘END’,to reset turn the function selector back to “0”.This

opearation will be followed by the display of ‘OFF ‘which will be lit for 3 seconds.

Note:the maximum time which can be set with this function is+ 23h 59'

FUNCTION

HOW TO

ACTIVATE IT

HOW TO SWITCH

IT OFF

WHAT IT DOES WHAT IT IS FOR

MINUTE

MINDER

• Allow to use the oven as

alarm clock.

• Can only be used with the

oven switched off

• At the end of the set time

the programmer will

activate an audible alarm

which will ring for 1minute;

to stop the alarm press any

button.

• The minute minder is

automatically set to 0

whenever another function

is selected.

• Sounds an alarm at the

end of the set time

• To check how long is left

press the button D

• Press the button D

• Press the buttons E or F

to set the duration time

• Release the buttons.

• After three seconds the

symbol will be di-

splayed and countdown

will commence.

• The display will indicate the

correct time of the day.

COOKING TIME

DURATION

• Turn the function selector

to a cooking function (either

than or ). The

display will show the re-

commended temperature

and cooking time..

• The preset cooking time

can be modified as follows.

- Press the button B

- Press the buttons E or F to

set the cooking time.

- Confirm your choice by

pressing the button A; the

‘ ’ symbol will appear

on the display and the oven

will begin cooking.

• It allows to preset the

cooking time required for

the recipe chosen.

• The cooking time left to run

is shown on the display.

• To view the temperature

set, press the button F

• To change the cooking

time/duration, press the

button B and then press

the buttons E or F

• For cooking the desired

recipes.

• When the time has elapsed

the oven will switch off

automatically; the display

will show the word "END"

and an audible alarm is

activated for 1 minute;

• the alarm can be stopped

by pressing any button or

by turning the function

control back to “0”. In the

latter ‘OFF’ will be lit for

3 seconds.

• To stop the cooking

function early turn the

function control back to

“0”.

If the function is not confirmed by pressing A, after 1 minute the oven switches itself

off and the display will show ‘END’, to reset turn the function selector back to 0.

This operation will be followed by the display of ‘OFF ‘which will be lit for 3 seconds.

Note:the maximum cooking duration is 10 hrs and the minimum is 2 mins.

END OF

COOKING

• At the set time the oven will

switch off; display will show

the word "END" and an

audible alarm is activated

for 1 minute;

• the alarm can be stopped

by pressing any button or

by turning the function

control back to “0”. In the

latter “OFF” will be lit for

3 seconds.

• To stop the cooking function

early turn the function

control back to “0”.

• Enables you to set the end

of cooking time.

• The cooking time left to run

is shown on the display.

• To view the temperature

set press the button F

• To change the cooking

time/duration press the

button B and then press

the buttons E or F

USE OF THE ELECTRONIC PROGRAMMER

SETTING THE CORRECT TIME

• Setting the TIME

Press the button ‘E’ or ‘F’ to set the time. The display will show hh :mm ( 24 hours) the range is

between 0 :00 and 23.59. After 3 second have elapsed from releasing the buttons to change the time

press the button ‘D’ hold for 5 seconds and press ‘E’ or ‘F’. The new time will now be set.

ATTENTION: When the programmer is in waiting mode ( delay start set ) the set temperature is displayed alternatively with

time.

N.B.At any stage during cooking it is possible to check the oven temperature by pressing the button "F"

WARNING: The oven will work only once the time has been set..

The oven will not work if the clock is showing a pulsating .

The time can only be set with the function selector in the 0 position .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Candy 2d 966 x in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Candy 2d 966 x Manual

Product: