764896

Canadian Spa Company Vancouver KH-10032 Manual

23
Zoom out
Zoom in
Previous page
1/24
Next page
VANCOUVER
System-Related Messages
Memory Failure - Checksum Error* – M022
At Power-Up, the system has failed the Program Checksum
Test. This indicates a problem with the rmware (operation
program) and requires a service call.
Conguration Error – Spa will not Start Up
Contact your dealer or service organisation.
A Pump Appears to be Stuck ON – M034
Water may be overheated. POWER DOWN THE SPA. DO NOT
ENTER THE WATER. Contact your dealer or service organization.
A Pump Appears to have been Stuck ON when spa was last
powered – M035
POWER DOWN THE SPA. DO NOT ENTER THE WATER.
Contact your dealer or service organization.
Reminder Messages
General maintenance helps.
Reminder Messages can be suppressed by using the PREF
Menu. Reminder Messages can be chosen individually by the
Manufacturer. They may be disabled entirely, or there may be a
limited number of reminders on a specic model.
The frequency of each reminder (i.e. 7 days) can be specied
by the Manufacturer. Press Temperature Up button to reset a
displayed reminder message.
Appears on a regular schedule, e.g. every 7 days.
Check pH with a test kit and adjust pH with the appropriate
chemicals.
Appears on a regular schedule, e.g. every 7 days.
Check sanitizer level and other water chemistry with a test kit
and adjust with the appropriate chemicals.
Appears on a regular schedule, e.g. every 30 days.
Clean the lter media as instructed by the manufacturer.
Appears on a regular schedule, e.g. every 30 days.
The Residual Current Device (RCD) is an important safety
device and must be tested on a regular basis to verify its
reliability.
Every user should be trained to safely test the RCD
associated with the hot tub installation. An RCD will have a
TEST and RESET button on it that allows a user to verify proper
function.
Warning:
If freezing conditions exist, an RCD should be reset immedi-
ately or spa damage could result. The end user should always
trained to test and reset the RCD on a regular basis.
Appears on a regular schedule, e.g. every 90 days.
Change the water in the spa on regular basis to maintain
proper chemical balance and sanitary conditions.
Appears on a regular schedule, e.g. every 180 days.
Vinyl covers should be cleaned and conditioned for maximum
life.
Appears on a regular schedule, e.g. every 180 days.
Wood skirting and furniture should be cleaned and conditioned
per the manufacturers instructions for maximum life.
Appears on a regular schedule, e.g. every 365 days.
Filters should be replaced occasionally to maintain proper spa
function and sanitary conditions.
As needed.
Install new mineral cartridge.
Reminders
CHEK PH Check your PH levels (every 7 days)
CHEK CHEM Check your Chemical levels (every 7 days)
CLN FLTR Clean the Filters/replace Filters (every 30 days)
To reset the Reminders press TEMP-UP button until all
messages have been removed and
Spa Temp is displayed.
(23)
… 23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canadian Spa Company Vancouver KH-10032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canadian Spa Company Vancouver KH-10032 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info