765080

Canadian Spa Company Cambridge Manual

27
Zoom out
Zoom in
Previous page
1/28
Next page
CAMBRIDGE TP500
BP601 Board
(27)
SC30 Buss fuse 30 Amp
KK-10382
Glass fuse 10 Amp
KK-10376
f3 fuse topside 1/8
KK-11107
DIP Switch Functions
Fixed-function DIP Switches
A1 Test Mode (normally Off).
A2 In “ON” position, add one high-speed pump (or blower) with Heater.
A3 In “ON” position, add two high-speed pump
(or 1 HS Pump and Blower) with Heater.
A5 In “ON” position, enables Special Amperage Rule B. See Special
Features section under Conguration Options for functionality
with your system. In “OFF” position, enables Special Amperage
Rule A.
A6 Persistent memory reset (Used when the spa is powering
up to restore factory settings as determined by software
conguration).
A2 and A3 work in combination to determine the number of high-
speed devices and blowers that can run before the heat is
disabled. i.e. A2 and A3 in the ON position will allow the heater
to operate with up to 3 high-speed pumps (or two HS Pumps and
Blower) running at the same time. Heat is disabled when the
fourth high-speed pump or blower is turned on. Note: A2/A3 all
off = No heat with any high-speed pump or blower.
Assignable DIP Switches
A4 In “ON” position, enables a 5-minute cooldown for some
gas heaters (Cooling Time B).
In “OFF” position, enables a 1-minute cooldown for electric
heaters (Cooling Time A).
A7 In “ON” position, Simplied Menus on TP400/TP500/TP600.
Do not use graphic panels (TP800, TP900, or spaTouch™
family) with Simplied Menus.
In “OFF” position, Regular Menus on TP400/TP500/TP600.
This setting is compatible with all panels.
Undesignated switches are not assigned a function.
Jumper Denitions
J109 Non Applicable on CE models
J30 Do Not Use
J31 Jumper on 1 pin with 2.0kW or smaller heater
Jumper on 2 pins with a 3.0kW or higher heater.
NOTE: Jumper setting varies by system model which is shown
to the right of the jumper.
J44 Jumper must be on center two pins (240V) for CE Systems.
WARNING: Setting DIP switches or jumpers incorrectly may cause abnormal
system behavior and/or damage to system components. Refer to Switchbank
… 27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Canadian Spa Company Cambridge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Canadian Spa Company Cambridge in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info