732300

Camry CR 7910 Manual

6
Zoom out
Zoom in
Previous page
1/116
Next page
Fan mode -
E. Sleep mode button F. Fan speed button
Cooling mode -
G. Timer button H. Swing function button
- Press button “B” to select cooling mode between cooling mode → fan mode → dehumidifying mode. The cooling mode
control lamp J turns on .
- Press button “ C” or “ D” to adjust required temperature from 16℃ to 31℃), buttons are not available in fan or
dehumidifying mode.
- Press button “F” to select high speed or low speed, chosen speed control lamp “O” turn on.
- During fan mode operation the temperature and sleeping functions cannot be setup.
- When the device is not working, press button “G”, the LCD screen flashes, press the button “G” repeatedly to
setup the time the device will start to operate and how many hours it should operate. The LCD screen stops
flashing and timer control lamp “P” turns on.
- Press button “B” to select fan mode, fan mode control lamp “L” turns on .
- When the device is working, press button “G”, the LCD screen flashes, press the button “G” repeatedly to setup
the time the device will shut off and how many hours it should operate before it will shut off. The LCD screen stops
flashing and timer control lamp “P” turns on. This is a delayed start function.
Press button “A” to turn on and turn off the machine, the buzzer will play signal once.
C. Temperature down button 16-31°C D. Temperature up button 16-31°C
After machine turns on, default value is cooling mode with 22℃ and low fan speed.
Timer mode -
CONTROL PANEL operation – picture D
- Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
- Press button “B” to select dehumidifying mode, dehumidifying mode control lamp “K” turns on .
Dehumidifying mode –
- Press button “E” enter into sleeping mode, default value of fan speed is low.
- The sleep mode control lamp “N” turns on.
Sleep mode is not available in dehumidify and fan modes. When the device communicates that it is full of water -
the "M" indicator light flashes, then the device's standby mode, mode conversion and sleep mode will be cancelled
.
Air oscillation - Swing function –
Press button “I”, after the device turns on, swing function control lamp “R” turns on, the louver will swing
continuously left and right; by pressing the button again the movement will stop and the louver remain in that
position.
Sleep mode –
- Press button “B” to cooling mode.
- The sleep mode is automatically programmed. After the first hour of operation, the temperature will increase by 1
℃, after the second hour of operation, the temperature will increase by another 1 ℃, and then remain at the same
level.
6
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 7910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 7910 in the language / languages: All languages as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info