734438

Camry CR 7810 Manual

6
Zoom out
Zoom in
Previous page
1/60
Next page
6
After power on the device press mode switch (H) on the control panel (4) to select desired power level 800W or 1200W or 2000W by
repeated pressing. The display (3) will light up indicator A or B or C.
2. Make sure that all controls are set to off position. Connect the oil heater to mains power, press the power switch on (2) and then
press power on button (G) to start operation, press both again to stop operation. To turn off the device, press the power button (G) and
then press the power switch (2).
USING THE DEVICE
3. Power level setting
4. Temperature setting
1. Place the oil heater a minimum of 100 cm from walls, furniture, curtains, plants etc. on a flat and stable surface.
CAUTION: During first use of the heater a small amount of smoke may appear. This is normal.
A.– low power level 800W indicator B.– medium power level 1200W indicator
1.Carry handle 2..Safety power switch 3.Display:
C.– high power level 2000W indicator D.– heating mode indicator
WARNING: To avoid overheating do not cover the heater.
DESCRIPTION OF THE DEVICE (Figure 1)
sink filled with water.
22. The heater is filled with a set amount of special oil. Repairs requiring opening of the oil
container must be carried out only by the manufacturer or authorized representative, who
should be contacted if oil leaks from the heater.
23. If disposing of the heater please follow rules of oil disposal.
16. The power cable should not be placed above the heater, and also should not touch or
lie close to hot surfaces. Do not place the heater under an electrical outlet.
17. The surface of the heater can heat up to high temperatures of over 60 degrees C. Take
care when near the heater.
15. The heater should be placed on a level, heat-resistant surface, away (at least one
meter) from flammable materials (lace curtains, curtains, wallpaper, furniture etc.).
18. Do not cover the heater with curtains, a towel or hang washing on it – this can damage
the heater or cause a fire.
19. When using the heater, completely unwind its cable and make sure that the cable is not
touching the hot surface of the heater.
20. Do not use the heater near basins, showers, sinks, pools or other places where it can
get wet.
21. The device must be completely cool prior to storage. Keep the original packaging to
store the heater in during non-heating seasons.
5.Cord storage 6.Radiant ribs 7.Wheels 8.Remote control
K.– timer switch
I.– temperature increase button J.– temperature decrease button
E.– timer mode indicator F.– power indicator
4.Control panel:
1. Turn the heater upside down.
G.– power button H.– mode switch to select power level 800W / 1200W / 2000W
2. Place the wheel bases between the first two ribs and end two ribs.
4. Block the clamp by screwing on the butterfly nut.
5. Place the heater on the wheels.
CAUTION: After turning the heater, wait at least one hour before connecting it to a power outlet.
ASSEMBLY (Fig. 2)
3. Use the U-shaped clamp to hook the bases.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 7810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 7810 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info