801628

Camry CR 7732 Manual

6
Zoom out
Zoom in
Previous page
1/88
Next page
6
convector in the event of excessive temperature convector (due to clogged vents, fan
malfunction ) . In this case, disconnect the unit from the power supply , waiting a few
minutes and remove the cause of overheating,
21. Do not touch the hot parts of the convector . Do not touch the appliance with wet hands.
22. In the case of wet convector or falling of any object through the ventilation grille of the
convector , turn it off immediately and disconnect from the network. Before re- use
with convector call for service .
23. Do not place the convector directly below the electrical outlet.
24. Always turn off the convector button before disconnecting it from the mains.
25. Do not use this heater in the immediate vicinity of a bathtub, shower or swimming pool
26. Do not use this heater if it has been dropped
27. Do not use if there are visible signs of damage to the heater
28. Use the heater on a level and stable surface or attach it to the wall, if provided for by the
manufacturer
WARNING: Do not use this heater in small rooms where there are people who are unable
to leave them by themselves, unless constant supervision is ensured.
WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at
least 1 m away from the heater air outlet.
"Caution Hot Surface" - The temperature of accessible surfaces may be higher when the equipment is in operation, which
means that the housing elements become hot during operation during operation, BE CAREFUL !!!
WARNING: In order to avoid overheating - do not cover the heater. The device is not to be covered with clothing, blankets
and other textile products which could cause ignition.
DEVICE DESCRPTION (Fig. 1)
1. Indication lamps 2. Control panel
3. Handle 4. Air outlet grid
5. Decorative ring 6. Feet
7. Power switch 8. Air inlet grid
Control Panel (Fig. 2)
9. Standby button 9A. Standby indicator 9B. Fan function (cold air) indicator
10. Temperature regulation button 10A. Desire temperature level indicators
11. Heating power regulation button 11A. Low heating power ~1100W indicator
11B. High heating power 1500W indicator
12. Timer button 12A. Desired heating period indicators
USAGE
1.Plug in the device to a 220-240V~50Hz socket.
2.To start the device, press the power switch (7) located at the back of device.
3.The standby indicator (9A.) on the control panel lights up.
4.Press the standby button (9) to activate the device.
5. The device will blow cold air from fan, the fan function indicator (9B.) will be lighted up.
6.Press the heating power regulation button (11) to choose suitable power level:
- to get low heating power ~1000W press once, at the same time the indicator (11A) will light up,
- to get high heating power 1500W press twice, so both indicators (11A + 11B) will be lighted up.
7.Press the timer button (12) to set the countdown time to turn off your heater automatically when the heater is on. You can set up the
heating time by repeated pressing the timer button (12), the desired heating period will be shown by indicators (12A). To switch off the
timer function press button (12) again. The maximum heating time is 7 hours.
8. The device is equipped in digital thermostat control. During operation, press the temperature regulation button (10) to set the desired
temperature (15°C / 20°C / 25°C / 30°C / 35°C) /15°C when the room temperature rises to the set temperature, the heater will stop
heating until the moment the temperature drops a few degrees. After choosing the desired temperature level one of indicators (10A) will
be lighted up.
Note: The temperature set using the temperature regulation button (10) button will not be reached if it is less than the current room
temperature.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 7732 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 7732 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info