yourself.
8. Never wash the device under running water or in such a way that water drips into it.
9. Do not use accessories that are not recommended by the manufacturer. They may pose a
danger to the user and may cause damage to the device.
16. Do not use the device in areas where flammable liquids are stored or where flammable fumes may be present.
8. The device is not intended for use in bathrooms, laundry areas or similar indoor locations. Never place the device where it may fall into a
bathtub or other water container.
17. Always unplug the device when moving it from one location to another .
1. Remove all packing material and straighten the power cord
3. When assembling the device, beams and rafters should not be cut or cut
12. CAUTION: Some parts of this device may become very hot during operation and cause
burns.
9. Do not use outdoors.
10. Do not place any objects close to the outlet grills or the air intake openings of the device when operating.
15. Do not insert any object through the heater outlet or air intake grills of the device.
11. Do not place the device on carpets having a very high hairs.
PRODUCT DESCRIPTION: CONVECTION HEATER WITH REMOTE CONTROL
7. Remote control 8. Fan’s ventilation grid 9. Compartment for remote control
2. During installation, in no case may the device be covered with insulating material or similar material
A. Power button B. Heat output button
5. Check if the voltage listed on the product ratting label corresponds to the voltage of the power network in your home
7. Keep the mains lead away from the hot body of the device.
INSTALLATION IN STANDING POSITION ON THE FLOOR
Before using the device, the feet (supplied separately in the carton), must be fitted to the device. These are to the base of the heater using
the 4 self-tapping screws provided. Take your care to ensure that they are located correctly in the bottom ends of the device side moldings.
1. Power switch 2. Air outlet grid 3. Air inlet grid
4. Feet 5. Housing 6. Control Panel LCD
III. BEFORE FIRST USE
13. Do not position the device in front of, or immediately below, a wall socket.
4. Before first use read all instructions for use.
CONTROL PANEL
14. Do not position the under the window.
10. Ensure that the device has cooled down before storing.
11. Do not touch the housing during use. During operation, use only knobs and switches.
After switching off, wait for the device to cool down.
6. Do not use the device unless the feet are correctly attached
12. Always ensure that the device is placed on a firm level surface. Ensure that the device is not positioned close to curtains or furniture as
this could create a fire hazard.
3. To set the heat output press the heat output button (B) the appropriate number of times, the required heat level setting is achieved:
E. Temperature unit button F. Temperature increase button
G. Temperature decrease button H. Frost protection indicator
The remote control (7) operation way is same as buttons on control panel (6).
- four times pressing means the device come into frost protection function, snowflake indicator (H) will be shown on control panel. The
2. Press the power button (A) to illuminate the control panel (6), the device is ready to operate now.
1. Turn on the device by pressing by hand the power switch (1) on the left side of device.
C. TURBO FAN button D. Timer button 1-24 hours
I. TURBO FAN indicator J. Selected temperature indicator
- three times pressing means high heat setting - 2300W heat output, value will be shown on control panel,
K. Room temperature indicator L. Time remaining indicator to turn off the device
USAGE
- two times pressing means middle heat setting - 1300W heat output, value will be shown on control panel,
- one time pressing means low heat setting - 1000W heat output, it will be shown on control panel,
7
