797771
7
Zoom out
Zoom in
Previous page
1/116
Next page
7
REMARK: The device is intended to clean the wet mud, damp dust, wet sand. The device is not a dirty water pump to collect big quantity of
water from for example the flooded basement.
Function 6: Blower
Blower helps to make order with fallen leaves in your garden or it helps to clean difficult to reach corners from dust. Fit the cover of blower
(14) on the back of the main cover (7), next put the construction gasket (27) on the edge of stainless steel container (4). and insert the
plastic hose (17) into hole in the cover of blower (14).
Tool socket with synchronization – Picture D
It is additional function of this device useful for construction branch that is extremely valuable with connection of the fact the device is
equipped in extra-long 15 meters power cord.
The position “II” of switch (1) is only used when the other electric construction tool: e.g. wall sander had been plugged into the vacuum
cleaner. When press the button to the 'II' position the vacuum cleaner doesn't work. But after the user connect the e.g. the wall sander, the
vacuum cleaner will start working in 2 seconds. If the user switches off the wall sander, the vacuum cleaner will keep working for 8 seconds,
so that it can suck up the left dust and after 8 seconds, the device stops working automatically. Tool socket is designed for the collaboration
work of the vacuum cleaner and other power tools. The power of socket is 2000W. Use the tool adapter (23) and the plastic hose (17) to
assemble your electric construction tool.
CLEANING AND MAINTENANCE
Switch off and unplug the device before cleaning and maintenance work.
A. Cleaning of filters.
1.Wash the filters with water (at 40 max). When washing HEPA filter (12) / sponge filter (13) / cotton filter (20), please be gentle and
avoid brushing them, as they can be torn easily.
2.Remember to dry each filter for 24 hours at least before reusing them. You can contact with your local retailers for buying the spare ones.
3. Paper bag cannot be washed. Once it’s full, please remember to replace it with a new one.
B. Cleaning of accessories
1. Wash hoses, the telescopic tube and the floor brushes regularly in order to avoid any trash blocking them.
2. Shake off the water left inside after cleaning, and make sure they are dried for at least 24 hours.
C. Cleaning of tank
1. Clean the surface of the tank and inside of it.
2. Remember to wipe it up!
TECHNICAL SPECIFICATION:
Tank capacity 25 liters
Air flow 36L/S ( 2.16m³/h )
Suction power 20 kPa
Nominal power 1400 W
Power tool socket with synchronization: 2000W
Maximum power 3400W
Power supply 220-240V ~50/60Hz
Noise level: 82 dB
Product dimensions 55 x 40 x 40 cm
WICHTIGE SICHERHEITSHINWEISE SORGFÄLTIG DURCHLESEN UND FÜR DIE
ZUKUNFT AUFBEWAHREN
1. Lesen Sie vor der Verwendung des Geräts die Bedienungsanleitung und befolgen Sie
die darin enthaltenen Anweisungen. Der Hersteller haftet nicht für Schäden, die durch die
Verwendung des Geräts im Widerspruch zu seinem Verwendungszweck oder einer
unsachgemäßen Bedienung entstehen.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 7045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 7045 in the language / languages: All languages as an attachment in your email.

The manual is 2.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info