801602

Camry CR 5036 Manual

5
Zoom out
Zoom in
Previous page
1/108
Next page
4. After use, turn the temperature control knob (I) to the “OFF” position.
5. Remove the plug from the wall socket.
STEAM IRONING FUNCTION
1. Fill the water tank with water as described in “Filling with water”.
3. Turn the temperature control knob (I) clockwise to the “MAX” position.
4. When the iron reaches the required temperature, the heating indicator light (H) will turn off.
1. Fill the water tank with water as described in “Filling with water”.
5. Adjust the steaming by moving the steam control switch (C).
2. Plug in. The heating indicator lights (H) will turn on.
3. Note: No matter what steam ironing of dry ironing is, spray will always be available in any case.
SPRAYING FUNCTION
2. Press water spray button (D).
8. After each use, make sure that the water tank is empty.
Caution: Do not steam ironing synthetic fabrics, nylon, synthetic silk, or silk fabrics. Steam can ruin the texture of the fabric.
7. Remove the plug from the wall socket.
This function will be able to provide more steam to remove stubborn creases.
2. Release the steam by pressing the steam button (E).
6. After use, turn the temperature control knob (I) to the “OFF” position.
BURST OF STEAM FUNCTION
1. Set the temperature control knob (I) to MAX until the indicator light (H) goes off.
2. Plug in. The heating indicator lights (H) will turn on.
5.Adjust the steaming by moving the steam control switch (C).
4.When the iron reaches the required temperature, the heating indicator light (H) will turn off.
8.After use, turn the temperature control knob (I) switch to the “OFF” position.
10.After each use, make sure that the water tank is empty.
11.Caution: Do not use steam ironing on clothes or fabrics that are wearing people or animals. The temperature is too high.
6.Hang the garment on a clothes’ hanger and pull the garment tight with one hand.
3.Turn the temperature control knob (I) to the “MAX” position.
7.Hold the iron in vertical position with the other hand and press the steam burst button (E) to iron the garment. Touch the garment lightly
with the soleplate of the iron to remove creases.
9.Remove the plug from the wall socket.
VERTICAL STEAM IRONING FUNCTION
3. Wait for several minutes and let the steam penetrate through the fabric, and then release more steam through pressing this button again.
Note:
The vertical steam ironing system allows you to use the iron for vertical ironing. This is especially useful for getting wrinkles out of hanging
clothes, curtains.
1. There should be 3-5 seconds rest between two times of pressing Steam burst button (E) in order to obtain the best steaming result.
2. Fill the water to the MAX position before using this function.
3. In order to prevent the water leaking from soleplate, please do not press the steam burst button (E) continuously with more than 5
seconds.
1. Fill the water tank with water as described in “Filling with water”.
SELF-CLEANING SYSTEM
3. When the heating indicator light (H) turns off, unplug.
6. Gently move the iron back and forth until the water tank is empty.
Caution: The water that comes out during self-cleaning is very hot. Be very careful not to fall on you.
Note: Before you start the self-cleaning procedure, make sure the iron is not plugged in and the steam control (C) is in the “0” position.
2. Plug in and turn the temperature control knob (I) to the “MAX” position. The heating indicator light (H) will turn on.
1. Fill the water tank with water up to “MAX”. Do not use vinegar or other descaling liquids in the water tank.
4. Hold the iron in a horizontal position above the sink. Press and hold the Self-Clean button (J).
7. When the water tank is empty, release the self-clean button.
5. Steam and boiling water will start to come out of the iron plate holes, which contain salts and minerals that have been accumulated in the
steam chamber from previous uses.
1. Use tap water only.
ANTI-CALC SYSTEM
2. Distilled and demineralized water makes the anti-calc system ineffective by altering its physicochemical characteristics.
A special filter inside the water tank softens the water and prevents scale build-up in the soleplate. The filter is permanent and does not
need replacing.
8. Allow the iron to cool down completely.
9. Wipe the soleplate with a cold damp cloth.
5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 5036 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 5036 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 14.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info