801593
9
Zoom out
Zoom in
Previous page
1/120
Next page
9
7. After the second tank of the solution is emptied. Please put fresh water into the tank and flush out the solution by emptying the fresh
water tank by pressing the lungo button until the tank is empty.
3. Put a brewing basket (5) into the device and lower the lever (1).
4. Turn on the device.
2. Fill the tank full with the solution of the decalcifier and water as per producers of the decalcifier guidelines.
12. Rinse with water until fully clean.
13. Please make sure to drain the detachable drip tray and rinse it with water.
You can change the standby mode on or off.
Disable or enable the standby mode:
1. With the device unplugged from the mains power press both the Espresso (A2A) and Lungo (A2C) buttons.
2. Press the espresso (A2A) button to turn the standby mode On (light on) or Off (light turned off).
3. Press the ON / Off (A2B) button to confirm the setting.
Device Data:
Voltage: 230V ~ 50Hz
Power: 1450 W
Maximum Power: 3000 W
Water capacity: 0,6 L
At least once a month or earlier depending on the number of drinks made the device needs to be decalcified.
11. Remove the capsule / pod / coffee powder from the brewing basket (5).
10. WARNING. AFTER BREWING THE BREWING BASKET (5) WILL BE HOT TO THE TOUCH. PLEASE TAKE CARE NOT TO BURN
YOURSELF.
To do so please follow the below instructions:
1. Use specially made pressure coffee maker decalcifiers.
5. Put a big bowl in place of the cup.
6. Please use the Lungo setting (A2C) and empty at least 2 full tanks of the decalcifier and water solution.
PLEASE NOTE: NEVER USE VINEGAR OR OTHER ACID-BASED DECALCIFIERS FOR THIS DEVICE. IT CAN DAMAGE THE
DEVICE.
If you want to add some more water or think the amount of coffee is too little you can press and hold the espresso button and the device
will continue to produce water. TO stop releasing the button.
Decalcification:
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
ingredients may pose a threat to the environment. The electrical device should be handed over to limit
Worn device should be returned to the appropriate point storage because it is dangerous in the device
its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 4414 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 4414 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info