801019

Camry CR 4083 Manual

5
Zoom out
Zoom in
Previous page
1/84
Next page
5
TECHNICAL DATA
4. Set aside to dry.
5. Clean the motor base (7) with moist cloth, and then wipe dry.
7. When the mixed products have proper consistence, turn the device off by rotating speed adjustment knob (8) to the OFF position.
Wait until the blades stop moving. Remove the power plug from the power socket. Remove the lid.
NOTICE: Don't immerse motor base (7) in water or other liquids.
Max. Power: 2200W
Voltage: 220-240V~ 50/60Hz
Recommended operation time: max 1 minute turned on + 10 minutes turned off.
Power: 1000W
Make sure that the device is disconnected from the power.
1.Fill the jug with water to half of its volume. Add a few drops of dishwashing liquid.
2.Turn speed adjusting knob to ON, then push the Pulse knob several times in a row.
NOTICE: Do not wash any blender parts in dishwashers.
3.Remove the jug (5) from the motor base (7), empty and rinse under running water.
CLEANING AND MAINTENANCE
NOTE: Before each use you need to place the lid and the measure cup on the jug.
NOTE: The jug assembly is not prepared to disassemble by the home user. Disassembling may break the safety lock feature (4).
NOTE: Blender has a safety lock (4) feature. If the blender jug (5) is not properly assembled device will not operate.
1 – Low speed: suitable for soft food blending.
Knob marking:
clockwise to the locked position (closed padlock symbol) (4).
NOTE: To crush the ice move the knob to “P” position for about 1 second, and then wait at least 2-3 seconds before repeat.
6.Turn the device on by rotating speed adjustment knob (8) to chosen speed.
NOTICE: During operation always hold the jug (5) with a hand.
2 – High speed: suitable for hard pieces of food.
1.Place assembled blender on stable, flat surface.
2. Make sure the speed adjustment knob (8) is set to the OFF position (“0”).
0 – OFF: turn off the unit.
P – Pulse: suitable for short-time blending (a few seconds). Use it if some of the food pieces are too hard to blend, or stuck.
When you move the knob to the pulse setting, blender runs at its highest speed as long as you keep pushing it. Recommended to use
for ice crushing.
4. Remove the lid (2) from the blender jug (5), put the ingredients in for mixing. In order to avoid overflow, the level of ingredients in the
jug (5) should not exceed ¾ of jug's height. Close the lid (check ASSEMBLY point 2 for the details).
5. Connect the power plug to the power outlet.
3. Place assembled jug (5) on the motor base (7).
III - HOW TO USE:
2. Cover the jug (5) with the lid (2). Pull the lid using the lid ring (3) until it moves over the handle.
3. Place the measurement cup (1) into the lid (2). Turn the cup clockwise until its locked in the position.
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
ingredients may pose a threat to the environment. The electrical device should be handed over to limit
its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
Worn device should be returned to the appropriate point storage because it is dangerous in the device
(DE) DEUTSCH
SICHERHEITSBEDINGUNGEN
WICHTIGE HINWEISE ZUR SICHERHEIT DES GEBRAUCHS
BITTE SORGFÄLTIG LESEN UND FÜR ZUKÜNFTIGE BEZUG AUFBEWAHREN
2. Das Produkt ist nur für den Heimgebrauch. Verwenden Sie das Produkt nicht für einen
1.Bevor Sie das Produkt verwenden, lesen Sie bitte die folgenden Anweisungen sorgfältig
durch und befolgen Sie sie immer. Der Hersteller haftet nicht für Schäden durch
Missbrauch.
Die Garantiebedingungen gelten abweichend, wenn das Gerät gewerblich genutzt wird.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 4083 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 4083 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info