800778

Camry CR 1180 Manual

4
Zoom out
Zoom in
Previous page
1/100
Next page
4
device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
● A broadband connection in combination with a wired/wireless access point, router or similar network device.
● The network device needs to support WIFI (802.11b/g/n) wireless connection.
● A PC or smart phone with a network ready. This network has to be the same one as the CR 1180 equipped with.
2. Getting stared
2.1 Get the network ready
. For wireless LAN(WLAN) network connection:
Check if WLAN LINK/ACT light of the wired/wireless access point or router is illuminated. Consult the user guide of that for any
questions.
Note: WiFi allows date transfer over short distances within up to 20 meters without the need of cabling between the devices, Any walls or
ceilings may reduce the strength of the WiFi connectivity.
Therefore try to locate the CR 1180 and/or the access point within the distance above, and avoid any obstacles between two devices.
. Connect the power adaptor to the back of the CR 1180 and plug into DC IN socket
. When it is first time running the device, the system will ask you to set Language and Network Configurations.
. Select Yes to establish connection to the network
- Configuration : Various system settings
- Local Radio: Access to radio stations in a particular region (e.g. only German stations)
- My media U : Access to an online media library. This menu item only appears if the function has already been enabled under
Configuration
〉Manage my media U.
. Press and hold the Power I Menu button to enter standby mode. The time, date and any active Alarm times display on the screen.
4.Preset 5.Left 6.Right
7.Navigate 8.Volume 9.DC IN
10.Earphone socket
1. Before Starting
1.1 Network Requirement
Before using the CR 1180,the following requirements are needed:
. If you have setup a network connection, and use CR 1180 again within the network, CR 1180 will automatically make the connection. In
case you desire to change the network, enter configuration to setup the corresponding connection.
. Select Yes(WPS)(Only for WPS routers).Then press the WPS button on your router.
If you answer 'Yes', the display goes to scanning for Wireless Network and shortly afterwards a list of available wireless networks will
appear.
The number of bars in the wireless symbol in front the network name(SSID) shows the relative signal strength of the network.
The key symbol indicates that the network is password-protected.
If the device does not find any wireless networks, No wireless Networks found appears on the display, Change your location, if necessary
and check your WLAN router. You can find the
SSID of your Access Point in the configuration of the Access Point(Router) .
Select your network and confirm with OK ,If your WLAN is password-protected, you will be prompted to enter your password.
Enter the password using the buttons on the device. Note the use of upper and lower case
when entering the password.
You can rotate reel to choose the code. if it is accidentally pressed 'right' to move a redundant entry, Pressed 'left' to correct.
15. Avoid getting the device wet.
16. The device may only be wiped with a dry cloth. Do not use water or cleaning fluids.
17. The device should be kept in a dry room.
Device description
1.LCD Display 2.Power I Menu 3.MUTE
The cursor indicates the current entry space.
buttons:
'Left' Go to previous entry space, entry can be overwritten
'Right' Go to next entry space, the last entry is saved
'UP / DOWN' Select number/letter
'Enter' Confirm entire entry
It may take a few seconds to establish the connection to the network.
Once the connection is established, the main menu appears with the main
menu items:
- Internet Radio : Access to worldwide radio stations
- Media Centre: Access to your UPnP devices via software with streaming capability.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 1180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 1180 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info