800777

Camry CR 1173 Manual

9
Zoom out
Zoom in
Previous page
1/204
Next page
9
2. Tap the SOURCE Button (A1, B11) on main or remote control to select Bluetooth mode, Bluetooth “bt” message appears in display and
flashing.
3. If the CR 1173 has never been paired with a Bluetooth device before or cannot find the last paired device, the flashing “bt” on LCD will
indicate the XXX is in search mode. You need to follow the pairing instructions below to link the Device with your Bluetooth device.
· Turn on the Bluetooth function of your Bluetooth device and enable the search or scan function to find the CR 1173.
· Select " CR 1173 " from the device list when it appears on your device screen. If required, enter the pass code “0000” to pair (link) the
CR 1173 with your device.
4. After successfully pairing (linking), display will change to show “bt” steadily, the Bluetooth icon also will show in display. You can begin
playing music from your Bluetooth device wirelessly to the speaker.
5. After selecting your favorite song, press PLAY PAUSE (B22, A9) Button on the unit or remote control to play or pause the song.
6. Press the volume control on main unit or remote control to adjust to the desired volume level.
7. Press Track Down, Track up (B8, B9) Button on main unit or remote control to skip to previous or next song.
8. If you want to pair the Device with another Bluetooth enabled device, press and hold the PAIR (B10) Button for 3 seconds or turn off the
Bluetooth function of device currently paired with Device then repeat step 3 above.
Notes:
1.) Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled devices for Bluetooth operation since it may
vary from model to model.
2.) If your Bluetooth enabled device does not support A2DP profile, it will not play the music through the speaker, even if paired (linked).
3.) If you are pairing (linking) your computer to the unit using Bluetooth, you may need to set the speaker as your computer's default sound
device.
AUXILIARY INPUT OPERATION
This unit features an auxiliary audio signal input jack for connecting external audio devices like MP3 players, Digital Audio Device and listen
to them through the speakers of this unit.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
2. Plug one end into the AUX IN JACK (A5) on main unit and the other end of the cable into the Line-out Jack or Headphone Jack of your
external audio device.
3. Turn on the unit and external audio device.
4. Tap the SOURCE Button (A1, B11) on main or remote control to select AUX mode, “AUX” icon turns on, display shows “AUX” message.
5. The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual.
Note:
· If you connect this unit to the Line-Out Jack of your external device then you only need to adjust the volume control of this unit. If you
connect the Headphone Jack of your external device then you may need to adjust both the volume controls of your external device and
this unit to obtain the desirable volume setting.
PRESET EQ (REMOTE CONTROL ONLY)
This unit provides 4 different EQ modes to enhance your listening experience. You can select the desired effect by pressing the EQ Button
(B5) on remote control repeatedly at following sequence:
ROCK POP JAZZ CLASSIC OFF
MUTE BUTTON (REMOTE CONTROL ONLY)
· Press the MUTE Button (B21) on remote control to mute the sound output from the speaker temporarily. The “V 00” will appear in
display.
· Press the MUTE Button (B21) again or VOLUME CONTROL (B23, A12) to resume the normal speaker playback.
SLEEP OPERATIONS (REMOTE CONTROL ONLY)
The sleep timer allows you to turn the unit off after a designated time is reached.
1. To activate the sleep timer, turn the unit on and tap the SOURCE Button (A1, B11) to select FM radio, CD, USB, Bluetooth or listening to
music via AUX IN.
2. Tap the SLEEP button (B14) on remote control, the sleep time icon “SLEEP” appears on the display.
3. Repeatedly tap the SLEEP button (B14) to select a sleep time. The unit will turn off after 10, 20, 30, 40, 50, 60, 70, 80 or 90 minutes.
Wait for 3 seconds after your selection for the unit to confirm the selection, the unit will play for the selected length of time then
automatically turn off.
4. To cancel the sleep timer, tap the SLEEP button (B14) repeatedly until timer shows “OFF”, the sleep time icon “SLEEP” disappears on
the display
5. To turn the unit off before the selected length of time, press the POWER / STANDBY Button (A1,B1) at any time.
Notes:
1.) To check the remaining sleep time, tap the SLEEP button (B14) once.
2.) If you are falling asleep to music from an external device connected to the AUX input, the sleep timer will shut off the power to this
system but it will not turn off the external device.
USING HEADPHONES (NOT INCLUDED)
Inserting the plug of your headphones into the Stereo Headphone Jack (A17) will enable you to listen to the CD or Radio music in private.
When using headphones, the Built-in Speakers will be disconnected.
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off your unit.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camry CR 1173 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camry CR 1173 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info