Manual Campingaz El Prado 1800 (page 7 of 90) (All languages)

662268

Zoom out

Zoom in

1/90

• Do not use charcoal.

• Do not use an adjustable low pressure regulator.

• Do not put a metal plate that has not been designed or recommended by CAMPINGAZ on

or in place of the cooking racks.

• Clean the parts in the bottom of the tank regularly to avoid the risk of fats catching on fire.

Follow these instructions carefully to avoid seriously damaging your barbecue.

Operation and maintenance

a) For your safety

- Do not store or use petrol and other flammable liquids or

vapours in the vicinity of this barbecue. If you smell gas:

1) Close the valve of the cylinder

2) Extinguish all naked flames

3) Open the lid

4) If the smell continues , see F or immediately seek advice

from your local retailer.

b) Location

- This barbecue must only be used outdoors.

- Please read instructions before using.

- Caution: accessible parts may get very hot. Keep young

children away.

- There should be no combustible materials within a radius of

approximately 60 cm around the barbecue

- Do not move the barbecue when alight.

- The appliance should be operated on a level surface.

- Estimated air offtake 2 m

/kW/h.

c) Gas cylinder

- This barbecue has been adjusted to be operate off 4,5 to 15

kg butane/propane cylinders (2,7 to 15 kg butane/propane

cylinders for 1800 / 1800 S / 1800 W models ) with an

appropriate low pressure regulator.

- France, Belgium, Luxembourg, United Kingdom,

Ireland, Portugal, Spain, Italy, Greece: butane 28-30

mbar / propane 37 mbar.

- Netherlands, Czech Republic, Slovakia, Hungary,

Slovenia, Norway, Sweden, Denmark, Finland,

Switzerland, Bulgaria, Turkey, Croatia, Romania:

butane 30 mbar / propane 30 mbar.

- Poland: propane 37 mbar.

- Germany,Austria: butane / propane 50 mbar.

- Always connect or replace the cylinder in a well-ventilated

area, never in the presence of a flame, spark or heat source.

- The hose should be attached at the rear of the device.

d) Hose

France (depending on model):

The unit is equipped with a G1/2 threaded inlet coupling. A

circular connector and rubber gasket are also supplied for the

butane/propane bottle.

Depending on the construction of your regulator, follow these

instructions:

1) For regulators equipped with an M20 x 1.5 threaded

outlet:

Use reinforced flexible tubing that complies with the XP D 36-112

standard.

Screw the G1/2 tubing coupling onto the connector on the

barbecue. Screw the M20 x 1.5 threaded connector onto the

regulator outlet.

- Use two wrenches to tighten the flexible hose on the gas end

piece:

- a number 20

wrench to

immobilize the

device input

connection,

- an adjustable

wrench to tighten

the flexible hose

nut.

- use a wrench to immobilize the regulator output connection.

Test the seal with gas leak solution.

2) For regulators equipped with a circular coupling:

Use a connector assembly (flexible tubing + collars) that

complies with the XP D 36-110 standard.

Screw the circular coupling supplied with the unit to the

threaded connector, inserting the rubber gasket between them.

When the gasket is in contact with the connector, tighten

approximately one half turn.

Connect the flexible tubing to the coupling on the barbecue

and the connector on the regulator by following the

instructions supplied with the connector assembly (couplings).

Test the seal with gas leak solution.

Make sure the flexible tubing is not twisted or under stress, and

does not come into contact with any hot surfaces on the unit.

The length of the tubing should not exceed 1.25 meters and

should be changed by the expiration date printed on the tubing

or whenever it is damaged or cracked.

M 20x1,5

Regulator

G 1/2

barbecue

black

M 20x1,5

Regulator

G 1/2

barbecue

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Campingaz El Prado 1800 in the language / languages: All languages as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Campingaz El Prado 1800 Manual

Product: