Manual Campingaz Comfort Heat CR - CR 5000 Comfort (page 8 of 59) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

662400

Zoom out

Zoom in

1/59

Thank you for choosing this Campingaz

catalytic

heater.

This operating handbook is common to the following

appliances:

Comfort Heat CR

Comfort Heat CR Thermo

A - GENERAL SAFETY INSTRUCTIONS

- This appliance must be used and serviced in

accordance with the regulations and standards in force.

- Please read this handbook before using your

appliance.

- This appliance should not be used in high rise

flats, in basements, bathrooms or bedrooms.

- Only use this appliance in a well ventilated room.

- This appliance should not be used in leisure

vehicles such as caravans and camping-cars.

- This appliance should not be installed in the

vicinity of walls, pieces of furniture, hangings,

curtains, bedding items and other inflammable

materials. To prevent fire hazards, it is strictly

forbidden to cover the appliance.

- This appliance should always be directed to the

centre of the room.

- Do not use your heater less than 50 cm from a wall

or combustible object.

- The gas hose should be replaced when the expiry

date is passed or whenever it is damaged or

develops surface cracks.

B - ASSEMBLING THE HEATER

Remove the body of the heater, the plastic panel for

protecting the gas cylinder and the bag containing the

accessories from the packaging:

- Remove the screws that attach the cylinder support to

the rear of the heater (see fig.1 point 3).

- Attach the four wheels (found in the accessories pack)

to the cylinder support (see fig.1 point 4) using the 4

M8 nuts and the no. 13 wrench from the accessories

pack to do this.

- After attaching the four wheels, attach the cylinder

support to the body of the heater using 4 M8 nuts and

4 M8 bolts from the accessories pack (see fig.1 point

5) and the no. 13 wrench mentioned above.

The heater is now ready to be attached to the gas

cylinder.

C - SETTING TO SERVICE

IMPORTANT

This operating handbook is intended for enabling

you to correctly and safely use your Campingaz

appliance.

Refer to the handbook to familiarise yourself with the

appliance before connecting the gas bottle.

Comply with this operating handbook instructions.

This appliance must be connected using a pressure

reducing valve and a hose. Call your vendor.

Non conformance with these instructions may be

dangerous for the user and his environment.

Permanently keep this handbook in a safe place so as

to refer to it when needed.

This appliance is preset in factory to operate with

butane using appropriate pressure reducing valve and

hose.

In operation, this appliance must be held away from

inflammable materials.

Never use a heater which leaks gas, does not operate

correctly or is damaged. Return it to your vendor who

will give you the address of the nearest dealer.

This appliance should never be modified nor used

in applications for which it is not designed.

C - 1 - Ventilating the room:

This appliance is a catalytic combustion heater

designed to be used in a sufficiently ventilated room.

A suitable ventilation makes it possible to exhaust

combustion residues and renew the combustion air.

The appliance should not be installed in a room the

volume of which is less than 61 m

for living-rooms and

30.5 m

for other rooms.

Air renewal ventilation area should not be less than

77 cm² evenly distributed between room upper and

lower levels.

A safety device will shut off the gas, thus extinguishing

the appliance if normal ventilation conditions are not

met.

C - 2 - Gas bottle and pressure reducing valve:

This appliance is designed to operate with 11 Kg to

15 Kg Butane or Propane gas bottles fitted with an

adequate pressure reducing valve (See Gas and

operating pressures page 3).

Only use the type of gas stipulated by the manufacturer.

In France, Belgium, Great Britain and Ireland it is

strictly forbidden to use another gas type than

Butane.

To install the pressure reducing valve, follow pressure

reducing valve operating handbook instructions.

To connect or replace the bottle, always operate in a

well-ventilated place, never in presence of a flame,

spark or heat source.

C - 3 - Gas hose:

France:

The appliance must be used with a hose fitted with a G

1/2 threaded nut to be screwed to the appliance and an

M 20x1.5 threaded nut to be screwed to the pressure

reducing valve (XP D 36-112 Standard).

The hose shall be 0.50 m long. It should be replaced

when the expiry date on the hose is passed or

whenever it is damaged or develops surface cracks. Do

not pull or twist the hose. Keep it away from parts that

are likely to get heated.

Hose installation, G 1/2 and M 20x1.5 nuts (XP D

36-112 Standard) (See Fig. 2 and 3):

- Check tightness in compliance with indications of

paragraph D-2.

Switzerland, Germany, Austria:

This appliance must be used with a DIN hose the

quality of which shall comply with the use of butane or

propane gas.

The hose shall be 0.50 m long. It should be replaced

if it is damaged or develops surface cracks or when

so required by national legislation. Do not pull or twist

the hose. Keep it away from parts that are likely to get

heated.

Connecting the hose: to connect the hose to appliance

inlet union, firmly but moderately tighten the hose using

2 suitable spanners:

M 20x1,5

Pressure

reducing valve

G 1/2

Appliance

black

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Campingaz Comfort Heat CR - CR 5000 Comfort in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Campingaz Comfort Heat CR - CR 5000 Comfort Manual

Product: