Manual Campingaz Camp Bistro (page 8 of 76) (All languages)

662441

Zoom out

Zoom in

1/76

Figures: see pages 2 to 4

Consumption: 160 g/h (2.2 kW)

Category: butane direct pressure

Thank you for choosing this Campingaz

CAMP’BISTRO

A - IMPORTANT: YOU ARE USING GAS, BE VERY

CAREFUL!

The purpose of these instructions is to enable you to

use your Campingaz

CAMP’BISTRO correctly and in

complete safety.

Please read them carefully to familiarise yourself

with the equipment prior to assembling the gas

container. Keep these instructions in a safe place

so that you can refer to them if needed.

Please observe these instructions and the safety

measures printed on the Campingaz

CP250/

CP250 SP cartridges. Failure to observe these

instructions may result in the user and people in

the immediate vicinity being put at risk.

This equipment must be used exclusively with

Campingaz

CP250/ CP250 SP cartridges. Using

other gas containers may be dangerous.

The Société Application Des Gaz accepts no

responsibility when cartridges of any other make

are used.

This equipment should only be used outside

premises and kept away from inflammable

materials.

Do not use equipment which leaks, functions

incorrectly or is damaged. Return it to your retailer

who will inform you of your nearest after-sales

service.

Never modify this equipment or use it for purposes

for which it is not intended.

Do not use this product in caravans, cars, tents,

huts, sheds or any small enclosed areas.

The product should not be used while sleeping or

left unattended.

This product consumes fuel through combustion

or consumption of oxygen and gives off certain

substances and gas, which could be dangerous

such as carbon monoxide.

Carbon monoxide is an odorless, clear gas that

can cause flu-like symptoms, sickness, illness,

and possibly death if produced inside aforesaid

enclosed areas through use of the product without

proper ventilation.

If the cartridge is automatically ejected from the

regulator, DO NOT CONNECT THE CARTRIDGE

AGAIN, let the appliance cool down completely

before any use.

Do not use a container smaller than 12cm or

larger than 26 cm in diameter. Do not use vessels

with concave or convex bottoms. Do not use

griddles, plancha or stone on the product except

specific Campingaz

accessories developed for

this product.

B - PREPARATION FOR OPERATION

- Remove the device from its packaging.

Installing a CAMPINGAZ

cartridge CP250/ CP250 SP

(When the existing cartridge is empty, read paragraph

D: “Changing the cartridge”)

To install or remove a cartridge, always work in a well-

ventilated area, preferably outside and never in the

presence of a flame, heat source or spark (lit cigarette,

electrical equipment, etc.) at a good distance from

other people and flammable material.

AS CAMPINGAZ

CP250/ CP250 SP CARTRIDGES

HAVE VALVES, EVEN IF THEY ARE NOT EMPTY,

THEY MAY BE REMOVED FROM THIS EQUIPMENT

TO MAKE IT EASIER TO TRANSPORT, AND THEY

MAY BE FITTED TO OTHER EQUIPMENT FROM THE

CAMPINGAZ

CP250/ CP250 SP RANGE WHICH

ARE DESIGNED TO OPERATE EXCLUSIVELY WITH

THESE CARTRIDGES.

- Open the cartridge cover (3) (fig. 2).

- Check that the ignition button (1) is set to position “l”

by turning it clockwise and that the lever (2) is set to

UNLOCK (Fig. 3).

Comment: the gas cartridge can only be locked if the

ignition button is in position “l” and the pan support is in

place.

- Check that the seal between the appliance and the

gas container is in place and in good condition before

connecting the gas container (see Figure 4). Do not

use this appliance if it has damaged or worn seal.

- Install the cartridge in its housing, slot “F” facing

upwards, and engage the cartridge guide “G” firmly

into the slot (Fig. 5).

- Lock the cartridge by moving the lever (2) to the LOCK

position (Fig. 6). Close the cartridge compartment

cover (3).

The equipment is ready for use.

CAUTION: Make sure the cartridge slot “F” is pointing

upward and inserted in the cartridge guide “G”.

Incorrect positioning of the gas cartridge (8) will cause

the regulator to break and/or gas leakage, producing a

hissing sound and gas smell.

In case of leakage (gas smell before opening the valve),

put immediately the equipment outside, in a well-ventilated

area, without inflammation source, where it will be possible

to locate and stop the lead. If you wish to check the

tightness of the equipment, do it outside. Do not try to

locate a leak with a flame, use gas leak detection liquid.

C - USE

Additional instructions:

Do not use your stove at a distance closer than 20

cm to a wall or flammable object, nor closer than 1

meter to a ceiling.

WARNING: Accessible parts may be very hot. Keep

young children away.

Never touch the pan support (4) or the burner (5)

during or just after using the equipment.

Do not obstruct the ventilation hole (7) in the

cartridge compartment cover (3).

Never use pans which cover the burner entirely (5).

Position the equipment on a stable, horizontal

surface and do not move when in use.

Wait until the appliance has completely cooled

down before handling and putting it away.

Lighting the burner

The equipment is fitted with a piezo-electric lighter

connected to an ignition electrode (6).

- Turn the control knob (1) anti-clockwise until you hear

a click ( ) indicating a spark (Fig. 7). If the equipment

does not light, turn the control knob to position “l” (Fig.

9) and start the operation again.

- If the equipment still does not light after three attempts,

turn the control knob to position “l” and check that the

cartridge contains gas (sound of liquid sloshing when

shaken) before starting the previous steps again. (If

the cartridge is empty, refer to paragraph D - Changing

the cartridge).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Campingaz Camp Bistro in the language / languages: All languages as an attachment in your email.

The manual is 2,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Campingaz Camp Bistro Manual

Product: