Manual Campingaz 600ST (page 9 of 80) (All languages)

658611

Zoom out

Zoom in

1/80

- 9 -

-16-

Keep young children away from the

appliance, some parts can be very hot.

ATTENTION: the appliance must be

completely unfolded and assembled, even

for the stove function.

CAUTION: Do not place a pan or any other

container above the Toaster Grill.

When lighting a burner (stove or Toaster

Grill) with the piezoelectric, position the

burner adjustment knob on the maximum

flow rate position ( ).

A pictogram specifies the position of each

adjustment knob on the appliance front

panel.

When the Grill Toaster is in use the

temperature of the support on which the

appliance is placed can become high. The

appliance must not be placed on a

combustible surface (plastic, cloth, etc.). It

is recommended that is should be placed

on a surface that resists heat (concrete,

stone, brick, directly on the ground) or that

a good incombustible thermal insulator

should be positioned between the

appliance and its support.

Setting up

- Pull the lid closure hook, then open it.

Remove the toaster handle stored in the

pan support.

Fit the handle onto the grill accessory (the

ends of the wires must pass into the holes

in the grill) (fig. E).

Check that the pan supports are correctly

positioned (fig. F).

Check that the gas supply pipe is not

trapped under the product and that it is

positioned so that it is not subject to

mechanical stresses (torsion, sharp parts of

furniture…)

Position the grill accessory in its location

after having assembled its handle (fig. G).

Your appliance is ready to use.

Stove function

- Open the gas supply (valve or lever on

regulator).

Rotate the knob corresponding to the

burner anti-clockwise to the maximum flow

rate position ( ).

Wait 2 to 3 seconds and press the

piezoelectric button ( ) several times until

the burner lights. If it does not light after 3

tries, position the adjusting knob to "OFF"

() by rotating it clockwise. Wait 1 minute

before repeating the operation.

Adjust the flame to the container

dimension by positioning the knob to the

defined range between ( ) and ( ).

- In strong winds arrange the appliance so

that the lid provides an obstacle to the

wind. Furthermore, your appliance has a

new patented, high wind performance

Campingaz

"xcelerate burner"

combined with a pan support (patented)

playing the role of 360° windshield.

- When cooking is finished turn the knob

corresponding to the burner clockwise to

position ().

Toaster Grill function

Important

: do not close the lid when

using the Toaster Grill.

- Open the gas supply (valve or lever on

regulator).

Rotate the knob corresponding to the

burner anti-clockwise to the maximum flow

rate position ( ).

Wait 2 to 3 seconds and press the

piezoelectric button ( ) several times until

Wait 2 to 3 seconds and press the

piezoelectric button ( ) several times until

the burner lights. If it does not

Wait 2 to 3 seconds and press the

piezoelectric button ( ) several times until

-17-

the burner lights. If it does not light after 3

tries, position the adjusting knob to "OFF"

() by rotating it clockwise. Wait 1 minute

before repeating the operation.

When cooking is finished turn the knob

corresponding to the burner clockwise to

position ().

IMPORTANT: Never close the appliance

lid without checking that all the burners

are off, the valves closed and the

appliance has cooled down.

G - REMOVING OR CHANGING THE

GAS CYLINDER

- Check that the gas cylinder valve or

regulator lever is in the closed position.

- Place the adjusting knobs in position

(

) by turning them clockwise.

- Disconnect the regulator from the gas

cylinder.

- Install the new gas cylinder.

- Connect the regulator to the new gas

cylinder (check the condition of the

regulator seal, before connecting it to the

gas cylinder).

H - FOLDING THE APPLIANCE

FOR TRANSPORT

IMPORTANT: Start by removing the gas

cylinder, and check that all the valves are

in the (



) position and that the appliance

has completely cooled down.

600 ST model only

Remove the textile shelf by withdrawing the

4 hooks. Fold the metal frames and roll the

textile around the frames.

Turn the appliance over and rest it on its lid.

Unscrew the 4 feet.

Fix the rolled textile shelf to the 2 "velcro"

attachments situated under the stove body.

Put the 4 feet back under the body,

proceeding in the reverse order to

assembly.

I - STORAGE - SERVICING

a) Appliance

Ensure that your stove is regularly

maintained, and it will give you many years

of excellent service.

- Do not clean the stove while it is in

operation. Wait for it to cool down, to avoid

burning yourself on the hot parts (hotplates,

pan supports, burners).

Remove the grill hotplates, the water

compartment, and drain the water (Grill

function).

- Check that the burner Venturi tubes on the

injector are not obstructed by dust or

cobwebs.

- While cleaning, take care not to obstruct

the burner holes. If the holes should be

blocked, for example by food overflow,

leave the burner cap in warm water and

unclog the holes using a non-metallic

brush.

- Clean the greasy parts with soapy water

or a non-abrasive detergent (do not use a

scouring pad or abrasive products).

For easier cleaning the grill hotplates,

water tank and pan supports can be

washed in a dishwasher.

- Remove and clean all parts of the stove

and dry them well.

"600 ST" model only: the shelves and

telescopic feet will be stored under the

appliance with the fixings provided for this.

Remember to protect the appliance lid by

inserting a protective material (paper,

cardboard, ….) between the lid and the grill

hotplates.

Store the assembly in a clean well

ventilated place.

If the appliance has not been used for

over 30 days verify that there are no

spider's webs blocking the burner tube,

which can reduce the efficiency of the

appliance or cause dangerous combustion

of gas outside the burner.

- Store the packed stove in a dry, well-

ventilated place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Campingaz 600ST in the language / languages: All languages as an attachment in your email.

The manual is 10,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Campingaz 600ST Manual

Product: