658608
11
Zoom out
Zoom in
Previous page
1/125
Next page
whenever it is damaged or develops surface
cracks.
Do not pull or pierce the hose. Keep away
from any parts of the appliance that get hot.
To use the equipment with the flexible
hose XP D 36-110:
Fitting the tubing: follow the assembly
instructions supplied with the flexible tubing
and collars.
Check for gas leaks following the instructions
in paragraph D.
Belgium, Luxembourg, United Kingdom,
Ireland, Portugal, Spain, Italy, Croatia,
Greece, Netherlands, Czech Republic,
Slovakia, Hungary, Slovenia, Norway,
Sweden, Denmark, Finland, Bulgaria,
Turkey, Romania, Poland:
The barbecue is equipped with a circular
connector. It should be used with flexible
hose that is suitable for use with butane and
propane gas. Hose length should not exceed
1.20 metre. It should be replaced if it is
damaged or cracked, when required by
national regulations or at the end of the part
lifecycle. Do not pull or pierce the hose.
Keep away from any parts of the barbecue
that get hot. Check that the flexible hose
stretches out normally, without twisting or
pulling.
Check for gas leaks following the instructions
in paragraph D.
Switzerland, Germany, Austria:
The barbecue should be used with flexible
tubing that is suitable for use with butane and
propane gas. Hose length should not exceed
1.50 metre. It should be replaced if it is
damaged or cracked, when required by
national regulations or at the end of the part
lifecycle. Do not pull or pierce the tubing.
Keep away from any parts of the barbecue
that get hot. Check that the flexible hose
stretches out normally, without twisting or
pulling.
Flexible tubing connection
: to connect the
tubing to the connector on the barbecue,
tighten the nut on the tubing firmly but
without excess force using the two
wrenches provided:
no. 10 wrench to tighten the connector
no. 17 wrench to tighten the nut on the
tubing
Connect the other end to the regulator outlet
union.
Check for gas leaks following the instructions
in paragraph D.
D - CONNECTING THE GAS
CYLINDER
If replacing an empty cylinder, read Section
D): «Removing or changing the gas cylinder».
When installing or removing a gas cylinder,
always operate in an open, well-ventilated
place, never in the presence of a flame, spark
or any other source of heat (cigarette,
electrical appliance, etc.), and away from
other persons or inflammable materials.
-
Position the gas cylinder on the ground,
behind or beside the appliance.
-
Close the regulator or gas cylinder valve.
-
Screw or click the regulator onto the
cylinder or onto the gas cylinder valve.
-
Close the stove valves by turning the knobs
clockwise, position ().
-
Check that the tubing lies normally, without
twisting or stress.
-
Check that the burner tube air holes at the
injector are not obstructed by dust or
spider's webs.
Gas leaks
Do not check for leaks using a flame. Use a
gas leak detecting liquid.
10
GB
-11-
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Campingaz 400SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Campingaz 400SG in the language / languages: All languages as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info