629604

Camos CM-1531 Manual

4
Zoom out
Zoom in
Previous page
1/4
Next page
7. Cleaning and General Maintenance.
8. FCC Compliance Statement.
i
i
If your vehicle has been parked in direct sun light resulting in a considerable rise in temperature
inside the vehicle, allow the unit to cool off before operating.
Clean the unit with a slightly damp soft cloth. Use a mild household detergent.
Never use strong solvents such as thinner or benzine as they might damage the finish of the unit.
CLEANING
VENTILATION
Unplug or power off mode before cleaning. Do not use liquid
cleaners or aerosol cleaners. use a damp cloth for cleaning.
Holes in the cabinet and of the back or bottom are provided for
ventilation, and to ensure reliable operation of the monitor
equipment by protection from overheating. These holes must
not be blocked or covered.
OBJECT AND LIQUID ENTRY
SERVICING
Never push obiects of any kind into this monitor equipment through holes as they may
touch dangerous volatge points or short-out parts that couId result in a fire of electric
shock. Never spill liquid of ary kind on the product.
Do not attempt to service this system by yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
NOTE
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide resonable protection against
harmful ,interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communication. Operation of this equipment in a residential area is likely to cause
harmful interference in witch case the user will be required to correct the interference at
his own expense.
CAUTION
Any change or modification in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
Cleaning and General
Maintenance.
FCC Compliance
Statement.
5. Connections
6. Operating Instructions
(1) Connect the WHITE wire to the positive (12V or 24V DC) power terminal which is energized
wlth the ignition key in the accessory position.
(2) Connect the BLACK wire to a metal point of the car or the negative battery power.
(3) Connect the GREEN wire to the switched power output terminal of the "R"(reverse) gear.
Waterproofing the connection
Waterproofing connection, whether it is on the inside or outside of the vehicle.
1.Wrap insulation tape once over the self-adhering tape, also overlapping it by one-half its width.
2. Wrap the tape tightly around the cord and connector so that there are no gap.
Vibration resistance
The DIN plug on the monitor has a locking mechanism, fix this locking mechanism by tapping
screw it together with Din plug to improve vibration resistance.
※
※
Note the power of the monitor :
When you push the power switoh on the S/B position, the monitor is placed in a S/B mode,
The monitor is not tumed off until the ignition key on the off position.
When you set the gear lever to the Reverse position, the monitor is tuned on and the picture
from the camera 1 appears.
Before making the connection, disconnect the ground terminal of the car battery to
avoid short circuiting.
The plug should be fully inserted into coneector or jacks. A loose connection may
be caused malfunction of the unit.
Caution.
※ When you turn the ignition key to the Accessory or ON position, the power is supplied to the
monitor and the monitor is in S/B.
!
C1
C2
Insulation
tape
Ground lead(Black)
Locking Mechanism
Tapping screw(PHW)2.6 x 12
A/V
6
7
To Power
Power Cable
Power input lead(White)
Power input lead
Reverse(Green)
CAMERA
POWER
INPUT
MODE
DC 12V/24V
CA2
CA1
MIR
NOR
CA1 CA2
VIDEO AUDIO
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camos CM-1531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camos CM-1531 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info