592496
7
Zoom out
Zoom in
Previous page
1/10
Next page
5
CAM1 CAM4
CAM4
AUX
AUX CAM1AUX CAM4
AUX
AUX CAM1
CAM3
CAM1 CAM2
CAM4CAM3
PICTURE SET
BRIGHTNESS 50
CONTRAST 50
COLOR 50
HUE 50
VIDEO SYSTEM NTSC
AUTO SWITCH OFF
RESET ▶
PICTURE SET
BRIGHTNESS 50
CONTRAST 50
COLOR 50
HUE 50
VIDEO SYSTEM NTSC
AUTO SWITCH OFF
RESET ▶
12 13
Former screen
Former screen
2) When there is input signal more than 2 triggers, the monitor display fully connected
screen (Trigger input screen) as the priority order. And the screen goes former one
when the signal is disappear. If there is one trigger disappears, the rest will be display
as the priority order.
Former screen TRIGGER 3 signal output
※ If the screen turns by trigger signal, every key doesn’t work.
If trigger signal inputs while power off (Stand-by) status, the screen power on
and display connected screen. And the screens turns off when the trigger signal
is disappear.
TRIGGER 2,3,4
simultaneous signal input
Video Standard System, NTSC/PAL conversion
1
If use PAL system on NTSC system using country, it may cause a malfunction. This
products can convert NTSC/PAL system manually but it is not automatic. Before use,
please check and set the system.
It is set NTSC from the factory.
Attention
NTSC system country : USA, CANADA, JAPAN, KOREA, TAIWAN, MEXICO
PAL system country : AUSTRALIA, BELGIUM, CHINA, DENMARK, FINLAND,
GERMAN, U.K, NETHERLAND, ITALY, KUWAIT,
MALAYSIA, NEW ZEALAND, SIGNAPORE, SPAIN,
SWEDEN, TAILAND, NORWAY.
QUAD SWITCHER
SETTING
Brightness and Contrast control
2
User can control BRIGHT/CONTRASS/COLOR/HUE.
Each setting value is set 50 from the factory.
1) Press setup button on remote controller then go into OSD MENU [PICTURE SET]
1) Press setup button twice on remote controller then go into OSD MENU [PICTURE SET]
on full screen of CAM1~4 or AUX.
On split screen, press setup button three times to go into [PICTURE SET]
2) Press ▼button to move a place where want to change and choice proper value by
pressing ◀▶button.
2) Press ▼button to move a place where want to change and choice proper value by
pressing◀▶button.
※ Trigger priority order
TRIGGER3 > TRIGGER4 > TRIGGER1+TRIGGER2 > TRIGGER1 > TRIGGER2
NOTICE
TRIGGER 1,4
simultaneous signal input
TRIGGER 1,2
simultaneous signal input
TRIGGER 4 signal output
TRIGGER 2 signal output
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camos CB-104S Quadbox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camos CB-104S Quadbox in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Camos CB-104S Quadbox

Camos CB-104S Quadbox User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info