569535
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
1. Gimbal Mounting
Screw the Mountingbail with 2 screws (M2x6mm) and spring washers with the Gimbal-System. The tabs shall
point in direction of the camera holder. Use a 1.5mm Allen screwdriver to perform this work.
Attach the mounting bracket with three screws (M3x8mm) on the small plate. Insert the screws through the
plate and fasten them to the mounting bracket.
2. Bellows and mounting on the RC- Model
Push the bellows into the 4 holes on the big mounting plate (see picture).
Make sure that these are mounted firmly and even.
Screw the big mounting plate onto your model.
Use the matching screws according to your model. If needed, you can also use the small white plates to avoid
a direct contact between main board and RC fuselage.
Please note, that the side with the connection ports of the main board shall be visible from below.
The big mounting plate already has some holes that you can use to mount it on your RC model.
Now place the pre-mounted plate with the Gimbal on the big mounting plate with the bellows.
Push the bellows into the plate.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for CamOne Gravity Air 2D Gimbal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of CamOne Gravity Air 2D Gimbal in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of CamOne Gravity Air 2D Gimbal

CamOne Gravity Air 2D Gimbal User Manual - German - 12 pages

CamOne Gravity Air 2D Gimbal User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info