810681
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
1. Schmid Profi W supply schedule
The supply schedule consists of:
Heating insert, completely submerged.
Exhaust gas connections dia. 180 mm top, left and right
with sealing covers.
Waterconnections:
feed (VL) 3/4" male
return (RL) 3/4" male
automatic vent valve 3/8" female
pump control sensor 1/2" female
thermal discharge safety device (TAS
sensor 1/2" female
cold water supply 1/2" male/TAS
cold water outflow 1/2" male/TAS
pressure relief valve 1/2" female
?
?
?
The device is designed such that feed and return are
connected opposing to avoid short circuits in the
water circuit.
Point 1 Fig. 1
Point 1 Fig. 2
Point 1 Fig. 3
1 = feed (VL) 3/4" male
2 = return (RL) 3/4" male
3 = automatic vent valve 3/8" female
4 = pump control sensor 1/2" female
5 = thermal discharge safety device (TAS) sensor 1/2" female
6 = cold water supply 1/2" male/TAS
7 = cold water outflow 1/2" male/TAS
8 = pressure relief valve 1/2" female
470
Ø 176a
1004
576169
2
2
259
1050
649 / 801
341 / 486 143
165 / 172
649 / 801
640
893
410
46
111
83
2
2
450
315 / 460 165 / 172
480 / 632
732 / 884
169
2
5 7 8 3 1 64
5
www.schmid.st
4. Guarantee
3. Installing the thermal discharge
safety device
The guarantee for delivery transactions is regulated by
§ 477 BGB and by § 13 VOB/B for contracts for works, and
is limited to material and manufacturing faults only.
Damage caused either by incorrect handling or by non-
compliance with the operating and installation instructions
are excluded from the guarantee.
No additional liability or costs are accepted. All claims are
voided if changes are carried out without the manufac-
turer's authorisation.
In order to guarantee safe operation when using solid fuels
in closed systems, the Profi W is equipped with a safety
heat exchanger with copper piping (DIN EN 12828).
Point 3 Fig. 1
The heat exchanger may only be used as a safety element,
not for domestic hot water heating. A type-tested thermal
discharge safety device must be installed, passed for a
minimum water throughput of 500 l/hr. Where possible use
components from the Schmid Feuerungstechnik range.
The cold water inlet may not be isolatable.
All connections between the piping and the Profi W must
be fitted with unions. The thermal discharge safety device
is connected between the inlet pipe and the safety heat
exchanger's connecting socket.
The thermal discharge safety device must be installed
such it can easily be inspected for leaks and functioning.
The pocket is screwed into the marked socket and the
thermal discharge safety device sensor inserted.
The working pressure of the thermal discharge safety
device when firing with solid fuels in closed systems to
DIN EN 12828 must be at least 2 bar to ensure safe
operation.
The device must inspected annually by a specialist!
Feed, 3/4"
Cold water inlet
Sensor for thermal discharge safety device, 1/2"
Thermal discharge safety device
Return, 3/4"
Pressure relief
valve
Automatic vent
Drain, 1/2"
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camina-Schmid Profi W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camina-Schmid Profi W in the language / languages: English as an attachment in your email.

The manual is 1.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Camina-Schmid Profi W

Camina-Schmid Profi W User Manual - German - 44 pages

Camina-Schmid Profi W User Manual - Dutch - 28 pages

Camina-Schmid Profi W User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info