810633
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
Operation
4.2 Installation and handover
SAFETY INSTRUCTION
Only permit atechnician to install your fireplace!
The fireplace must be installed by atechnician. Refer
to the attached installation instructions for design and
installation.
Ensure that the fireplace is handed over by the operator
or technician in line with national and local regulations, if
necessary, by representatives of the authorisation body
(chimney sweep).
4.3 Start-up
NOTICE
Incorrect initial start-up can lead to damage to the
fireplace!
SAFETY INSTRUCTION
Only permit atechnician to start up your fireplace!
SAFETY INSTRUCTION
The requirements governing safe and proper use need to
be fulfilled and guaranteed prior to initial start-up!
SAFETY INSTRUCTION
Gases can be released from the paintwork when the
appliance is heated up for the first time.
Provide adequate ventilation of the location of the fireplace
during this phase! The paintwork on the fireplace gains
its special strength when exposed to temperature during
initial start-up. This can result in temporary odours. Avoid
inhalation.
4.3.1 Initial start-up by the technician
The fireplace is initially started up by the technician. The
fireplace is heated for the first time and all connections and
fireplace components are checked. These checks need to be
documented and handed over to the operator.
To do so, use the start-up report at the end of these
operating instructions.
The technician needs to hand over to the operator all the
technical documents on the appliance and all accessory
parts for the safe operation of the fireplace. Following initial
start-up, the technician has an obligation to instruct the
operator in the correct and safe handling of the fireplace.
More information regarding initial start-up can be
found in the attached installation instructions.
4.3.2 Start-up by the operator
The operator of the fireplace has an obligation to obtain
instruction on the operation of the fireplace, safe and proper
handling and correct and environmentally-friendly heating
from the contractor.
He needs to hand over all the required technical documents
on the fireplace insert and all accessory parts for the safe
operation of the fireplace. He needs to have read and
understood information on safe and correct handling of the
appliance.
5. Operation
DANGER
Hazardous gases!
Risk of fatal injury by exhaust gas escape!
Ensure suicient air supply and/or discharge of heating
gases!
NOTICE
Damage caused by heat accumulation!
The fireplace is equipped with ventilation grilles for the
cold air inlet and hot air outlet. The grilles ensure safe air
circulation and prevent the accumulation of heat. Damage
can be caused to the fireplace and/or there can be odour
problems if these openings are not open or can be covered.
Never close or cover the ventilation grilles when the
fireplace is in operation!
Do not place any combustible objects close to hot air
outlets.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camina-Schmid Ekko at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camina-Schmid Ekko in the language / languages: English as an attachment in your email.

The manual is 4.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Camina-Schmid Ekko

Camina-Schmid Ekko User Manual - German - 44 pages

Camina-Schmid Ekko User Manual - Dutch - 44 pages

Camina-Schmid Ekko User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info