590633
14
Zoom out
Zoom in
Previous page
1/66
Next page
14/66 Device handbook CAM mobile, 06/2014
5 Connecting the device on-site
Observe warning 1…7 of the safety precautions!
5.1 General warnings
National provisions (e.g. in Germany VDE 0100 “Conditions concerning the erection of heavy
current facilities with rated voltages below 1000 V”) have to be observed !
5.2 Connecting power supply
For safe operation the device must have a low impedance connection to the protective
earth connector. Therefore, check under all circumstances the AC power socket and its
wiring !
Power supply is provided via an IEC power connector on the backside of the device using a
three conductor IEC power cord.
Under all circumstances this cord must provide a connection to protective earth.
If no connection to protective earth is provided or if protection is disabled by using an extension
cord without protective conductor the device may be hazardous.
Connect the device to the power supply using the IEC power cord. Do not switch on the device until voltage
and current inputs have been connected.
5.3 Connecting current and voltage inputs
By connecting measuring circuits dangerous voltages are brought to the inputs and
inside the device.
Using non-standard connecting cables may cause dangerous electrical shock.
Therefore, use the supplied connection cables only.
To ensure operational safety the device must first be connected to protective earth.
This is done via the power supply connector (see 5.2).
Switch off all measurement circuits before connecting them to the device. Make sure
that the maximum voltage to earth is not exceeded (300V CATIII, 600V CATII).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camille Bauer SINEAX CAM mobile at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camille Bauer SINEAX CAM mobile in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info