590633

Camille Bauer SINEAX CAM mobile Manual

5
Zoom out
Zoom in
Previous page
1/66
Next page
5/66 Device handbook CAM mobile, 06/2014
1 Safety precautions
The power analyzer CAM mobile has been designed as a protection class I instrument in accordance with the
safety regulations IEC/EN 61010-1. To ensure the safety of the operating staff a protective earth via the power
supply connector is mandatory and the following warnings must be adhered to. Safety is not guaranteed if
warnings are not followed or if the device is operated incorrectly or handled improperly. Reference is made to
the following warnings at corresponding points in the subsequent text to assure their compliance.
1
The power supply for the CAM mobile must be provided via the IEC power connector on
the backside of the device using a three conductor IEC power cord. Under all
circumstances this cord must provide a connection to protective earth. If no connection to
protective earth is provided or if protection is disabled by using an extension cord without
protective conductor the device may be hazardous.
2
The device may only be operated by trained personnel who are capable of recognizing
contact hazards and implementing appropriate safety precautions. Hazards are present
anywhere, where voltages with a potential of higher than 50V to ground may occur.
3
When performing measurements involving contact hazards a second person should
always be present. Typically this is the case during connecting current and voltage
inputs.
4
The connection of the measurement inputs may be performed not before the device has
been connected to protective earth in accordance with warning 1.
The maximum allowed potential of current and voltage inputs is:
300V CATIII resp. 600V CATIII
5
Only use measurement leads which are in perfect condition. Especially the insulation
may not be damaged.
It must be assumed that unexpected voltages may occur at measurement objects.
Capacitors, for example, may be dangerously charged.
6
Measurements under damp ambient conditions are not allowed. The device may not be
exposed to moisture.
7
The device must be put out of operation if a safe operation, e.g. due to visible damages,
is no longer possible. To do so, you have to switch-off all connections first. Then the
device has to be sent to our factory resp. to an authorized service center.
8
Opening the device is not allowed. Live parts may be exposed. Any intervention in the
device will void the warranty. Maintenance and repair work must be carried out by our
service center only.
Device may only be disposed of in a
professional manner !
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Camille Bauer SINEAX CAM mobile at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Camille Bauer SINEAX CAM mobile in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info