Manual Cambridge Audio Minx Xi (page 16 of 20) (English)

577809

Zoom out

Zoom in

1/20

Select your local network using the Navigation/Select dial and press it in for enter.

The Minx Xi will then connect to the network using a saved key (if you have

previously set one) or present you with an alphanumeric entry menu. Here you can

enter the network key you set up when setting up your wireless network.

Select each character in turn using the Navigation/Select dial and then press

navigate to the

symbol and press Navigation/Select dial to enter that key. If you

make a mistake, press

to go back one character.

The Minx Xi can handle keys in WEP, WPA and WPA2 formats (the choice of format

is made by appropriate settings on your router) and automatically generates the

right format from your text according to the router request.

Enter the network name

This option allows the Minx Xi to search for and connect to a particular network

name only.

Type your network name in using the alphanumeric entry screen.

If no matching network is found 'Network not found' will be displayed.

View Config

This menu rstly displays the IP mode (static or dynamic). This will be Auto/DHCP

(i.e. dynamic, this is the default) or alternatively Static IP.

For either mode by turning the Navigation/Select dial the Minx Xi will scroll through

the various current IP parameters, for instance the ESSID of the current wireless

network, Wired and Wireless MAC addresses, current IP address, (Sub)Netmask,

Gateway address etc.

Edit Config

This menu allows the selection of IP mode between static or dynamic (Auto/DHCP).

Auto/DHCP is recommended for most people in most circumstances. Static IP

requires quite a bit of knowledge about IP networks, and is for advanced users only.

The default setting is thus Auto/DHCP, here the Minx Xi obtains its IP address each

time you switch in on by a process called DHCP which means it is different each

time it is acquired. This process is completely automatic and much simpler than

implementing Static IP.

However sometimes it is useful (especially in large networks) to know the exact IP

address of each device, this can only be done by using static IP.

When using Static IP you will also need to enter the network mask you wish to

use and the addresses of your gateway and DNS service, note there is no way for

Cambridge Audio to know what these are in your network. Only select static IP if you

know exactly what you are doing!

To set static IP, select the 'Settings > Network cong > Edit Cong' menu and then

press SELECT.

The Minx Xi will now display 'Auto (DHCP)? YES / NO'. Turn the Minx Xi's rotary dial

to select 'NO' and then press SELECT.

This menu contains various setup / conguration menus as shown below.

Settings

Audio Settings

Network Cong

Version

Upgrade Firmware

Language

Factory Reset

Device Name

Idle Mode

Auto Power-down

Edit Audio Input Names

Audio Settings

Adjustments to the bass, treble and balance level can be made as follows:

Press and hold the

button to get to the top menu. Go to 'Settings - > Audio

Settings' and then press Select to bring up the Tone Control and Balance menu

items.

Select 'Tone Control' to adjust bass and treble output level. Select the desired

output level using the rotary dial and then press the Minx Xi's

button to go back

to the previous menu items.

Select 'Balance' to adjust the Left and Right balance output level. Select the

desired balance level using the rotary dial and then press the Minx Xi's

button to

go back to the Audio Settings menu.

Network Config

This menu enables you to set your Minx Xi's network settings, scan again for a

connection to another wireless network, or to manually congure the network

parameters. This is useful if you move your Minx Xi to a new location for instance.

By default the Minx Xi will be set for Automatic wired/wireless detection

and automatic IP addressing (DHCP) which will work without setup in most

circumstances (for Wi-Fi you will need to enter your WEP/WPA key if you have one).

In Auto mode the Minx Xi will look for a wired connection rst and then scan for

wireless connections if it doesn't nd one. It will also try to obtain an IP address

automatically from your router/DHCP server.

If you wish to make changes to your setup the Minx Xi displays the following

submenus.

Network Cong

Scan for networks

Enter network name

View Cong

Edit Cong

Signal Warning

WiFi Region

Wired/Wireless

Scan for networks

This option scans all available Wi-Fi frequencies for wireless networks and allows

you to connect to them.

The Minx Xi can connect to 802.11b/g or n networks (2.4GHz frequency range only

for n networks).

A list of available networks will be presented. If a particular network requires an

encryption key, a

symbol will be seen at the end of the network name.

Settings menu

I have been using the Cambridge Audio Minx Xi for a few years now. The most recent firmware update has been done successfully. Now I am having issues with song display on the radio stations I am using. The designated radio stations are showing in the display screen, however, the message is" Station unavailable". This ist only for the stations in Germany SWR1 Baden-Württemberg Submitted on 1-4-2022 at 14:41
Reply Report abuse
I have been using the Cambridge Audio Minx Xi for a few years now. The most recent firmware update has been done successfully. Now I am having issues with song display on the radio stations I am using. The designated radio stations are showing in the display screen, however, a blank screen where the song playing should show. Any suggestions would be most helpful? Thanks.

Mike. Submitted on 23-3-2022 at 19:17
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cambridge Audio Minx Xi in the language / languages: English as an attachment in your email.

The manual is 6,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cambridge Audio Minx Xi

Cambridge Audio Minx Xi User Manual - German - 20 pages

Cambridge Audio Minx Xi User Manual - Dutch - 20 pages

Cambridge Audio Minx Xi User Manual - French - 20 pages

Cambridge Audio Minx Xi User Manual - Italian - 20 pages

Cambridge Audio Minx Xi User Manual - Polish - 20 pages

Cambridge Audio Minx Xi User Manual - Swedish - 20 pages

Cambridge Audio Minx Xi User Manual - Spanish - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cambridge Audio Minx Xi Manual

Product: